Jacob's Ladder

This is the place for any magazine-related discussions that don't fit in any of the column discussion boards below.
Post Reply
okidoki
Posts: 1
Joined: Wed Oct 17, 2007 10:52 pm
Location: Netherlands
Contact:

Jacob's Ladder

Post by okidoki »

I believe there was an article about building a Jacob's Ladder in Nuts&Volts, but I don't know which issue. It must be before 2004 (you can only search back to 2004 online).

Does anyone know which issue it was, or even built it?
User avatar
dacflyer
Posts: 4751
Joined: Fri Feb 08, 2002 1:01 am
Location: USA / North Carolina / Fayetteville
Contact:

Post by dacflyer »

hi there,,jacobs ladders are very simple to build.
just google it..theres lots of links on how to build your own.
i have made lots of them,, and all you need is a neon transformer
use the old type that are heavy..the newer electronic ones are not good to use,as they have so much fault shut down circuits in them.

BUT DO BE CAREFUL, TRANSFORMERS CAN DEVELOP ANYWHERE FROM
2,000 VOLTS UP TO 15,000 VOLTS AND AS MUCH AS 30 MA. !
A SHOCK CAN KNOCK YOU ACROSS THE ROOM


but building one is simple..basically the arc starts at a small gap of the 2 wires the stiff wire "V" and the heat from the are makes it rise to the top where it will blow out. you have to adjust the gap at the top so the arc will fail..also you want to have a case around it for safety, and also to keep the breeze from making it not work right..


heres some links to get you started...
i googled "how to make a jacobs ladder"
if you have the items, you should be able to make one in a few hrs.

http://www.emanator.demon.co.uk/bigclive/jacobs.htm

http://www.instructables.com/id/How-to- ... _s-ladder/ this one you can scale down..

good luck,be safe
Post Reply

Who is online

Users browsing this forum: No registered users and 19 guests