Strain gages
-
- Posts: 2
- Joined: Fri Apr 11, 2003 1:01 am
- Contact:
Strain gages
Can someone please direct me to literature regarding using strain gages (120 or 350 Ohm) in conjunction with a Parallax Basic Stamp?
- Chris Smith
- Posts: 4325
- Joined: Tue Dec 04, 2001 1:01 am
- Location: Bieber Ca.
Re: Strain gages
On the strain gauge only, try National Semi conductor for their op amps etc.
Re: Strain gages
The strain guage output is very low, so you need an amplifier followed by an A/D converter. I seem to remember that the Basic Stamp has a simplified A/D capability, if you don't need high accuracy.
-
- Posts: 2
- Joined: Fri Apr 11, 2003 1:01 am
- Contact:
Re: Strain gages
Thank you Chris and Russ. I purchased an LM358 OPAMP from National Semiconductor and an ADC0831 A/D converter from Parallax. <p>Ken
Who is online
Users browsing this forum: No registered users and 53 guests