rs232 & pic's

This is the place for any magazine-related discussions that don't fit in any of the column discussion boards below.
Post Reply
Posts: 1
Joined: Sun Apr 06, 2003 1:01 am
Location: Farmington,nm.

rs232 & pic's

Post by Calrod516 » Sun Apr 06, 2003 3:38 pm

I would like to be able to use rs232 comm via two 900mhz transcievers, (one of them being used on my laptop, and the other connected to a plc,)that have built in switches for tx and rx, but i need to be able to emulate the cts and rts (timing).
i was wondering i anyone has any ideas as to wether or not a pic could be used as a buffer for the serial data and also control the timing metioned above.

Posts: 12
Joined: Fri Apr 18, 2003 1:01 am
Location: Wellington, New Zealand

Re: rs232 & pic's

Post by manuka » Fri Apr 18, 2003 5:05 am

The ( ex. UK) PICAXE family ( 08,18a,28 ) are great on serial comms, dirt cheap & dead easy to use. All have onboard EEPROM too. Check

Post Reply

Who is online

Users browsing this forum: No registered users and 42 guests