Page 1 of 1
Need Strobe Light Drawing
Posted: Thu Dec 06, 2001 4:39 pm
by NEO-Tech
Looking for a strobe light drawing (with instructions) that uses a flashtube and 110V supply. <p>Nothing too fancy, maybe ability to vary flash rate or add a second flash tube.<p>Thanks in advance.
Re: Need Strobe Light Drawing
Posted: Fri Dec 07, 2001 7:54 pm
by russlk
Buy a Radio Shack strobe tube PN 272-1145 and trigger coil PN 900-8751. Should come with instructions.
Re: Need Strobe Light Drawing
Posted: Thu Dec 13, 2001 4:20 pm
by NEO-Tech
(Chris, I am interested if the offer still stands) <p>I want to use the strobe light set up in a 5 foot wood lighthouse. I hope to be able to adjust the flash pattern to what works best for my application. (110v) <p>Any assistance/advise is still appreciated.
Re: Need Strobe Light Drawing
Posted: Thu Dec 13, 2001 5:46 pm
by Chris Smith
Yes, you want one or two, I'll drop you the Email address on the Private line.
Chris
Re: Need Strobe Light Drawing
Posted: Thu Jan 03, 2002 5:49 pm
by jollyrgr
Go Here to see a schematic that was published in Nuts and Volts some time ago:<p>
http://wolfstone.halloweenhost.com/Hall ... tning.html<p>You will need to scroll down just about half way to find the schematic for the strobe light circuit.<p>[ January 03, 2002: Message edited by: Jolly Roger ]</p>