Requesting deletion of eccentric flywheel garbage

This is the place for any magazine-related discussions that don't fit in any of the column discussion boards below.
User avatar
Externet
Posts: 1824
Joined: Fri Feb 01, 2002 1:01 am
Location: Mideast USA
Contact:

Requesting deletion of eccentric flywheel garbage

Post by Externet » Thu Jun 27, 2002 3:41 pm

Enough of it.
I did not want to get close to the issue, but it's time now.
And if you want an eccentic flywheel, a kid can tell you that sawing off a portion of a pulley will do it. And if you cannot saw, drill a hole away from the center.
And end your crap subject.
Miguel :mad:
- Abolish the deciBel ! -

User avatar
Chris Smith
Posts: 4325
Joined: Tue Dec 04, 2001 1:01 am
Location: Bieber Ca.

Re: Requesting deletion of eccentric flywheel garbage

Post by Chris Smith » Thu Jun 27, 2002 10:18 pm

Eh! You Talkin to da hustler, Do you think he is listening? <p>Chit has momentum, and keeps rolling down hill!

JdOwNj
Posts: 95
Joined: Thu Dec 06, 2001 1:01 am
Location: Garland, Maine
Contact:

Re: Requesting deletion of eccentric flywheel garbage

Post by JdOwNj » Fri Jun 28, 2002 6:55 pm

AMEN... get that smut outa here!

keymaker
Posts: 214
Joined: Mon Jan 14, 2002 1:01 am
Contact:

Re: Requesting deletion of eccentric flywheel garbage

Post by keymaker » Sat Jun 29, 2002 3:13 pm

Now you listen here friend ok here's the deal, It is NOT smut, I asked some legitimate questions, which I wanted answered. If your that afraid of your masculinity that you can't stand to read a sortly risque question, You should reside at a gay bar instead of amongst men. I've would have defended my position on this issue sooner, But I've been on a drinking spree as of late. When I am done, I am going to build one of these.. WHY? Because my mother needs money, my father needs money, my woman needs money, my sister needs money, and most of all *I* need money. I'm not here to piss anyone off! If I don't find the knowledge here, where shall I find it? If you're such the expert, Instead of telling me I cannot post here, You tell me WHERE else I can find the information. Don't create problems when you can offer solutions.<p> Thank you for understanding my position, Again, I am not out to offend anyone.

JdOwNj
Posts: 95
Joined: Thu Dec 06, 2001 1:01 am
Location: Garland, Maine
Contact:

Re: Requesting deletion of eccentric flywheel garbage

Post by JdOwNj » Sat Jun 29, 2002 6:53 pm

try rec.pornography.devices and get it outa here..

keymaker
Posts: 214
Joined: Mon Jan 14, 2002 1:01 am
Contact:

Re: Requesting deletion of eccentric flywheel garbage

Post by keymaker » Sun Jun 30, 2002 12:28 am

Don't you think those fools will steal my idea???

JdOwNj
Posts: 95
Joined: Thu Dec 06, 2001 1:01 am
Location: Garland, Maine
Contact:

Re: Requesting deletion of eccentric flywheel garbage

Post by JdOwNj » Mon Jul 01, 2002 5:55 am

I dunno... I have to say, I dont frequent the place, but to get back to the basics, you have a MECHANICAL question and this board id dedicated to Electronics!

User avatar
Externet
Posts: 1824
Joined: Fri Feb 01, 2002 1:01 am
Location: Mideast USA
Contact:

Re: Requesting deletion of eccentric flywheel garbage

Post by Externet » Mon Jul 01, 2002 8:37 am

And aren't YOU stealing the idea from somebody else ?<p>And do not come up with any other 'brilliant' reply about NUTS&Volts being also a mechanical stuff because of the NUTS and the GEAR in the logo at top of this forum.<p>And we do not need to know about your drinking problems and needs to feed your family. Alcohol prices can feed people instead.<p>Miguel :mad:
- Abolish the deciBel ! -

josmith
Posts: 340
Joined: Tue Dec 04, 2001 1:01 am
Contact:

Re: Requesting deletion of eccentric flywheel garbage

Post by josmith » Tue Jul 02, 2002 12:37 pm

Electronics is not an "adult" subject. I started when I was around 10. I would like to be able to direct any young person here without exposing him or her to anything inappropriate.

User avatar
MicroRem
Posts: 201
Joined: Tue Dec 04, 2001 1:01 am
Location: Vancouver, WA USA
Contact:

Re: Requesting deletion of eccentric flywheel garbage

Post by MicroRem » Tue Jul 02, 2002 1:22 pm

Roger that!

bodgy
Posts: 1044
Joined: Tue Dec 04, 2001 1:01 am
Location: Australia
Contact:

Re: Requesting deletion of eccentric flywheel garbage

Post by bodgy » Tue Jul 02, 2002 8:46 pm

On that last comment I'll keep silent!
On a clear disk you can seek forever.

JdOwNj
Posts: 95
Joined: Thu Dec 06, 2001 1:01 am
Location: Garland, Maine
Contact:

Re: Requesting deletion of eccentric flywheel garbage

Post by JdOwNj » Wed Jul 03, 2002 6:54 pm

Very true about the booze prices... <p>All this talk about vibrators, I start to wonder where he has one stuck...<p>There are other ways to feed a family, get a job for instance...

keymaker
Posts: 214
Joined: Mon Jan 14, 2002 1:01 am
Contact:

Re: Requesting deletion of eccentric flywheel garbage

Post by keymaker » Thu Jul 04, 2002 12:43 pm

Miguel stop with your red face
:D

JdOwNj
Posts: 95
Joined: Thu Dec 06, 2001 1:01 am
Location: Garland, Maine
Contact:

Re: Requesting deletion of eccentric flywheel garbage

Post by JdOwNj » Sat Jul 06, 2002 6:40 pm

if ur makin the equal of 20 an hour, then what are you trying to build a vibrator for?

JdOwNj
Posts: 95
Joined: Thu Dec 06, 2001 1:01 am
Location: Garland, Maine
Contact:

Re: Requesting deletion of eccentric flywheel garbage

Post by JdOwNj » Sat Jul 06, 2002 6:42 pm

A few bottles? I dont buy the stuph (too young), but whats that, 20, 30 bux? thatl buy a few pretty decent meals...

Post Reply

Who is online

Users browsing this forum: No registered users and 8 guests