Whitfield Pellet Stove
Whitfield Pellet Stove
I have a Whitfield stove that is starting to act up... It has an auto-igniter and when I turn it on, the cup will actually fill up with pellets before sometimes lighting.. I have replaced the igniter and slowed the auger speed down on startup but the cup still fills up and does not ingnite... I can see a glow from the igniter .... any thoughts on this?
Re: Whitfield Pellet Stove
Sounds like the Whitfield is popular with you nor-westerners! See "wayne"'s thread at:
http://206.131.241.58/ubb/ultimatebb.ph ... 1&t=002317
Best of luck!
John
http://206.131.241.58/ubb/ultimatebb.ph ... 1&t=002317
Best of luck!
John
WA2RBA
Re: Whitfield Pellet Stove
what model whitfield stove do you have ?
bobhunter
bobhunter
- Chris Smith
- Posts: 4325
- Joined: Tue Dec 04, 2001 1:01 am
- Location: Bieber Ca.
Re: Whitfield Pellet Stove
What not to Buy.... a Whitfield stove this Christmas?
-
- Posts: 76
- Joined: Mon Sep 01, 2003 1:01 am
- Location: Coast of Mexico
- Contact:
Re: Whitfield Pellet Stove
<blockquote><font size="1" face="Verdana, Helvetica, sans-serif">quote:</font><hr>Originally posted by Chris Smith:
What not to Buy.... a Whitfield stove this Christmas?<hr></blockquote><p>Man, I don't think I'd want to be near one. I had a pellet stove many yaears ago, can't remember the brand but it served me well for several years.
What not to Buy.... a Whitfield stove this Christmas?<hr></blockquote><p>Man, I don't think I'd want to be near one. I had a pellet stove many yaears ago, can't remember the brand but it served me well for several years.
-
- Posts: 8
- Joined: Wed Dec 29, 2004 1:01 am
- Location: Idaho
- Contact:
Re: Whitfield Pellet Stove
Why wouldn't you want to be near one? Less messy that wood and way more effecient. They do require some maintenance though...
- Chris Smith
- Posts: 4325
- Joined: Tue Dec 04, 2001 1:01 am
- Location: Bieber Ca.
Re: Whitfield Pellet Stove
The main topic here at N&V seems to be complainants, post after post. <p>All not happy campers, all Whitfield owners. <p>Yes the writing is on the wall, and its not written in Chinese either.
- dacflyer
- Posts: 4748
- Joined: Fri Feb 08, 2002 1:01 am
- Location: USA / North Carolina / Fayetteville
- Contact:
Re: Whitfield Pellet Stove
all these stove threads all should be in one deal not spreadding out like its starting to..
whats all this got to do with electronics anyway?<p>2nd...you people must have to be special ordering these pellets to burn....or is there a pellet store near??????<p>anyway...sounds like a big headache them stoves..lol
whats all this got to do with electronics anyway?<p>2nd...you people must have to be special ordering these pellets to burn....or is there a pellet store near??????<p>anyway...sounds like a big headache them stoves..lol
-
- Posts: 8
- Joined: Wed Dec 29, 2004 1:01 am
- Location: Idaho
- Contact:
Re: Whitfield Pellet Stove
The post belongs because we were originally talking about the 'electronic' control board that is the heart of these beast's. Wayne and I were trying to locate a part for one. Yes, we have lots of pellets in Idaho...
- dacflyer
- Posts: 4748
- Joined: Fri Feb 08, 2002 1:01 am
- Location: USA / North Carolina / Fayetteville
- Contact:
Re: Whitfield Pellet Stove
ahhh , ok,,
hope them aren't animal dropping pellets :p
hope them aren't animal dropping pellets :p
-
- Posts: 8
- Joined: Wed Dec 29, 2004 1:01 am
- Location: Idaho
- Contact:
Re: Whitfield Pellet Stove
I'd burn them there animal pellets too, if I could get enough to fill a bag!
Re: Whitfield Pellet Stove
Pellet stove that won't ignite until the tray is too full, create too much ash and alot of heavy black smoke on the inside window often are not getting enough combustion air. Clean your stove inside out. Make sure the rod that attaches to the heat exchanger cleaning plate is attached and use it every day. Make sure the damper is open far enough. It isn't like a wood burning stove where you would close it to where the stove burns slow. You want good air flow. There are combustion air flow adjustments that can be made on most whitfield control boards. If not on front or behind the little door at the bottom of the board, then look on the back of your control board. I have charged alot of people to do nothing more that to clean their stove and adjust it properly. Some people refuse to read their owners manual, some don't have them, some don't understand them. I'll help if I can.
Who is online
Users browsing this forum: No registered users and 63 guests