Edenpure Classic space heater...NOT LEVEL

This is the place for any magazine-related discussions that don't fit in any of the column discussion boards below.
User avatar
Posts: 3037
Joined: Thu Aug 01, 2002 1:01 am
Location: San Jose CA

Re: Edenpure Classic space heater...NOT LEVEL

Post by haklesup » Tue Nov 20, 2018 10:34 am

I've not tried one of those so called IR heaters, does it perform differently that a plain old space heater. To me a Watt is a Watt no matter how you put it into the air. OTOH, the configuration of the heat sink does effect the efficiency of how the heat flows. In a regular space heater, the element remains hot as the air flow is insufficient to remove all of its heat. With a larger radiator, more heating Watts (BTU) per Electrical Watt may reach the occupant.

Too late for this advice but I was wondering if you picked it up and rotated it around would any position read level. The level detect probably could have been bypassed but it is an essential safety feature best not defeated. It apparently does prevent some fires.

User avatar
Posts: 4537
Joined: Fri Feb 08, 2002 1:01 am
Location: USA / North Carolina / Fayetteville

Re: Edenpure Classic space heater...NOT LEVEL

Post by dacflyer » Tue Nov 20, 2018 11:50 am

this i know..but i meant, i do not see any other reason, i looked on the net and it seems that no one else makes them in copper..

Posts: 1749
Joined: Fri Aug 22, 2003 1:01 am
Location: Izmir, Turkiye; from Rochester, NY

Re: Edenpure Classic space heater...NOT LEVEL

Post by dyarker » Wed Nov 21, 2018 4:53 am

Copper is also more expensive.

People that don't know/care about a fairly small difference in performance and appearance go for the cheaper. so that is what mostly made. Others buy more expensive thinds for long term cost efficiency or "status".
Dale Y

Post Reply

Who is online

Users browsing this forum: No registered users and 36 guests