Uniden Bearcat 350c help

This is the place for any magazine-related discussions that don't fit in any of the column discussion boards below.
Post Reply
User avatar
moe
Posts: 91
Joined: Fri Jan 11, 2002 1:01 am
Location: USA
Contact:

Uniden Bearcat 350c help

Post by moe »

Hello to the group I hope someone and help me.
I have a older BC350C Police scanner and I would like to know were I can tap into or test point to read the input signal strength of the stations I receive.
I want to measure it with a digital volt meter while
trying different antennas
Thank you for any help you may offer
User avatar
dacflyer
Posts: 4748
Joined: Fri Feb 08, 2002 1:01 am
Location: USA / North Carolina / Fayetteville
Contact:

Re: Uniden Bearcat 350c help

Post by dacflyer »

do you by chance have a link to a schematic ?
User avatar
moe
Posts: 91
Joined: Fri Jan 11, 2002 1:01 am
Location: USA
Contact:

Re: Uniden Bearcat 350c help

Post by moe »

sorry I do not and only thing I was able to find was the owners manual.Was looking for a service manual that I felt would help but no luck.
Robert Reed
Posts: 2277
Joined: Wed Nov 24, 2004 1:01 am
Location: ASHTABULA,OHIO
Contact:

Re: Uniden Bearcat 350c help

Post by Robert Reed »

Usually done by tapping into AGC circuitry- but again, you will need schematic.
gerty
Posts: 314
Joined: Mon Dec 06, 2004 1:01 am
Location: Tennessee
Contact:

Re: Uniden Bearcat 350c help

Post by gerty »

Found a place that had schematics...But not yours...http://w5jgv.com/downloads/Bearcat/
Maybe it'll help..
gerty
Posts: 314
Joined: Mon Dec 06, 2004 1:01 am
Location: Tennessee
Contact:

Re: Uniden Bearcat 350c help

Post by gerty »

The place I go to for rf info is http://www.radioreference.com
They have a section (forums) just for Uniden scanners, I also program Motorola and Vertex radios, they have sections for them as well.
Post Reply

Who is online

Users browsing this forum: Ahrefs [Bot] and 30 guests