Would you have this cutters for sale ?

This is the place for any magazine-related discussions that don't fit in any of the column discussion boards below.
Post Reply
User avatar
Externet
Posts: 1888
Joined: Fri Feb 01, 2002 1:01 am
Location: Mideast USA
Contact:

Would you have this cutters for sale ?

Post by Externet »

This and only this, no similars nor equivalents; would you have one for sale sitting forgotten behind the spider webs, used or not ?

Crescent 200 diagonal cutters : -----> http://www.weisd.com/store2/CRE200-SCEB.php
It is not Crescent 200mm !

Miguel
- Abolish the deciBel ! -
User avatar
dacflyer
Posts: 4748
Joined: Fri Feb 08, 2002 1:01 am
Location: USA / North Carolina / Fayetteville
Contact:

Re: Would you have this cutters for sale ?

Post by dacflyer »

curious, what's so special about these as to others like it ?
User avatar
Edd
Posts: 885
Joined: Sun Jan 27, 2002 1:01 am
Location: Dallas Tx
Contact:

Re: Would you have this cutters for sale ?

Post by Edd »

.



Ehhhhhhh Miguel . . . . . ¿ Que Paaaaaaaaaaaaaaasssssssssssa?

Why those specifically ? ? ?
My guess is that he has . . . or just lost a pair . . . that he may have had and used daily, since waaaaaaaay back in 1981.
Resplendently complete with deeeep hand ground in grime on the vinyl handles and multiple solder burns that inadvertantly happened.
Looks like the use of box joints at the pivot point axis and ball bearing(s) and that return spring example is probably the most trouble free of other treatments that I have seen used.
Also, the top tensionimg screw is appearing to be not just a common slotted screwhead, but having an internal hex recess for accepting an Allen wrench for better leverage and precise adjustment accuracy.
I am about the same preferential way, with a pair of my Yellow handled Lindstroms and also Green handled Weber units, that I have had for eons.
My first assumption is that those particular "pwemium" bwewed stainless steel units were not . . . repeat NOT . . of Crescents'/ Xcelite / Cooper Tools manufacture, but being of some Scandinavian or German manufacture and with Crescent merely then renaming and re numbering ANOTHER firms manufactutred product.
The sole past and last stocking supplier seems to be that Wholesale Electronics site for 63 Amellican Dollah a pair.
Go to these pic ref sites and see if one of these current "furrin" manufactured units might actually be the sourcing of the original product, or another current model might be close enough to keep you happy.

http://www.google.com/search?rlz=1T4GGH ... 80&bih=884

OR:

http://www.google.com/search?rlz=1T4GGH ... 2gW3pYHgDQ

OR:
http://www.google.com/search?rlz=1T4GGH ... 80&bih=884


73's de Edd
[email protected] . . . . . . . . (Interstellar~~~~~Warp~~~~Speed)
[email protected]. . . . . . . . (Firewalled*Spam*Cookies*Crumbs)



As expected . . . . Pessimists have already begun to worry about what is going to replace automation. .




.
User avatar
Externet
Posts: 1888
Joined: Fri Feb 01, 2002 1:01 am
Location: Mideast USA
Contact:

Re: Would you have this cutters for sale ?

Post by Externet »

Well, these cutters have been with me for over 30 years with not a single complain, and before they get tired, wanted to secure another pair.

:!: But those are not the most superb cutters I had. The Facom 4" flush cutters rated for piano wire were. And cannot find them either. Superb stuff gets discontinued too often. Sadly I abused them and broke after 40 years convinced they were omnipotent. R.I.P. :cry: :cry: :cry:

----> http://i588.photobucket.com/albums/ss32 ... 5d1617.jpg

Those piano wire rated Facom cutters were similar but not exact cutting head to these :
http://www.tradesmanschoice.com/catalog ... 5.12E.html

If cannot find, I will try these 'cheaper' :
http://www.applegate.co.uk/listings/sto ... -4482.html

Miguel
- Abolish the deciBel ! -
Dean Huster
Posts: 1263
Joined: Wed Dec 05, 2001 1:01 am
Location: Harviell, MO (Poplar Bluff area)
Contact:

Re: Would you have this cutters for sale ?

Post by Dean Huster »

I cannot envision ANY flush cutter being rated for piano wire. Generally speaking, they're for soft copper only -- use a semi-flush for the center conductor of RG-59. I absolutely LOVE flush cutters. The brand I use all the time is Diamalloy. They're better (when new and fresh) than anything for cutting fingernails and toenails! Wifey refers to them as "the green nippers".
Dean Huster, Electronics Curmudgeon
Contributing Editor emeritus, "Q & A", of the former "Poptronics" magazine (formerly "Popular Electronics" and "Electronics Now" magazines).

R.I.P.
User avatar
frhrwa
Posts: 897
Joined: Mon Feb 04, 2002 1:01 am
Location: Eastern Washington (state) and N. Las Vegas (winter)
Contact:

Re: Would you have this cutters for sale ?

Post by frhrwa »

I have a set that looks just like those, except if I remember, the rubber grips are a bluish color.. they have the blades with another little wire holder that holds just before it cuts.. I'll be home the 20th and get a picture if you'd like to see what they look like?..
JESUS”…… don’t leave EARTH without HIM!
EPA III
Posts: 39
Joined: Tue Aug 17, 2004 1:01 am
Location: Beaumont, TX
Contact:

Re: Would you have this cutters for sale ?

Post by EPA III »

Dean Huster wrote:I cannot envision ANY flush cutter being rated for piano wire. ...<snip>....
Can you say tungsten carbide?

Even though tungsten carbide should be OK for hardened wire, I have had carbide diagonal cutters but was never brave enough to use them for piano wire. Soft steel wire perhaps, but not piano wire. :mrgreen:

They do make special cutters for piano wire.
Paul A.
Bear
Posts: 52
Joined: Sun Jun 27, 2004 1:01 am
Location: California, SF Bayarea
Contact:

Re: Would you have this cutters for sale ?

Post by Bear »

Externet...The set of cutters from Tradesmanchoice.com made by Facom should be OK for cutting a wide range of piano or hardened wire. If my memory serves me correctly, music wire was/is drawn and hardened to RC42-46. The jaws on the above mentioned set of cutters are supposed to be hardened to RC63-65. If you routinely cut piano/spring wire I would check with a spring maker in your area. They are listed in the yellow pages.

Dennis
User avatar
Externet
Posts: 1888
Joined: Fri Feb 01, 2002 1:01 am
Location: Mideast USA
Contact:

Re: Would you have this cutters for sale ?

Post by Externet »

Thanks, Dennis.

What the 'piano wire' rating gives is a superb durability in sharpness when using it just for plain electronics copper. Copper is soft, and most copper rated cutters are not very durable because they are not intended for abuse.
After having those piano wire rated for electronics use, it is like am used to drive a battle tank to go to the supermarket. Shopping carts won't put a dent on it. :cool:
- Abolish the deciBel ! -
Post Reply

Who is online

Users browsing this forum: Ahrefs [Bot], Bing [Bot], Google [Bot] and 42 guests