Ferrox Cube

This is the place for any magazine-related discussions that don't fit in any of the column discussion boards below.
Post Reply
camino75080
Posts: 35
Joined: Mon Aug 02, 2004 1:01 am
Location: Richardson, Tx
Contact:

Ferrox Cube

Post by camino75080 »

Anyone know of a distributer of Ferrox ube cores and bobbins that will sell to the publics without huge minimum orders?
toejam
Posts: 253
Joined: Wed Dec 05, 2001 1:01 am
Location: n.c.
Contact:

Re: Ferrox Cube

Post by toejam »

what is a ferrox ube?
camino75080
Posts: 35
Joined: Mon Aug 02, 2004 1:01 am
Location: Richardson, Tx
Contact:

Re: Ferrox Cube

Post by camino75080 »

Sorry, i was in a hurry. Ferrox Cube.
User avatar
Edd
Posts: 885
Joined: Sun Jan 27, 2002 1:01 am
Location: Dallas Tx
Contact:

Re: Ferrox Cube

Post by Edd »

Well, you did get it right on your posts heading, excepting, that the unit is composed as one word. Ferroxcube, a long time and prime manufacturer of ferrite/powdered iron/ceramic products.
RFI beads and cores, ferrite power transformers cores, flyback cores, pot cores.
However, in equipment that I see nowadays, I am equally more apt to see TDK, Siemens, or Arnold as the manufacturer, as well as the Oriental sources.<p>You will find a wealth of tech specs and app notes at their website:
http://www.ferroxcube.com
(Most of USA referral is to the El Paso, Tx site) <p>Also there is more info on ferrite products at:
http://www.arnoldmagnetics.com/mtc/mtc_applications.htm <p>This site gives some cross referencing of core material between different manufacturers:
http://www.mhw-intl.com/products/tdgmaterialsguide.htm <p>As well as encompassing the TDK line in:
http://www.mhw-intl.com/products/reference.htm <p>Also,right next door to you, since the ‘80’s in Garland. with their Ferrite product line is:
http://www.novamagnetics.com/ <p>With your adjunct reference to bobbins, that would lean towards your interest in pot cores or D cores, possibly for power transformer utilization. If such is the case, have you considered the salvaging of a core unit from a defunct/discarded computer SwMode power supply. Their cores would be designed for the 200-300 watt power levels. I have used many of those units by just filing or Dremel tooling away the cores peripheral captive epoxy bead to get apart and access to the bobbin, and most then unwind successfully for rewind and reuse. (Excepting a select few clear epoxy encapsulated windings/units.) <p>73's de Edd
[email protected] ....……..(Interstellar~~~~Warp~~~Speed)
[email protected].........(Firewalled-Spam*Cookies*Crumbs
;) ;)
camino75080
Posts: 35
Joined: Mon Aug 02, 2004 1:01 am
Location: Richardson, Tx
Contact:

Re: Ferrox Cube

Post by camino75080 »

Thank you for the help. Yes I am trying to find thier cores for power transformer use, based off of a simple saturable core inverter.
Tweetldee
Posts: 6
Joined: Fri Oct 10, 2003 1:01 am
Location: Florida, USA
Contact:

Re: Ferrox Cube

Post by Tweetldee »

I used to buy small quantities of Ferrozcube products, including cores, bobbins, etc., from Elna Ferrite Labs. I think they've changed their name to Elna Magnetics (http://www.elnamagnetics.com/). Don't know if they still sell small quantites, but they're worth a try.<p>Dave M
Dave M
steve.repco
Posts: 1
Joined: Thu Oct 23, 2008 7:51 am
Contact:

Post by steve.repco »

I work for a company that stocks and distributes ferrite cores and does gapping: Repco Sales Company. We're not authorized distributors for Ferroxcube/Philips, but we do have some stock. Might be worth inquiring of us for anything you may be looking for. You can actually see our current inhouse stock onscreen at www.repcosales.com. --Steve
User avatar
dacflyer
Posts: 4748
Joined: Fri Feb 08, 2002 1:01 am
Location: USA / North Carolina / Fayetteville
Contact:

Post by dacflyer »

hi there Edd>> haven't seen you much.. BTW wheres your quips at,at the end of your replys ? they were great..
User avatar
Bob Scott
Posts: 1192
Joined: Wed Nov 20, 2002 1:01 am
Location: Vancouver, BC
Contact:

Post by Bob Scott »

Also for cores and literature have a look at:

http://www.mag-inc.com/

and

https://www.amidoncorp.com/

Amidon's market is aimed at the ham/experimenter. Mag-inc has lots of downloadable literature.

Bob
Post Reply

Who is online

Users browsing this forum: No registered users and 30 guests