i am looking for a key switch simmelar to the one in this link
http://web2.automationdirect.com/adc/Sh ... GCX1470-22
but i need one that is NON-MAINTAINED ( springs back to center )
the switch above can be maintained from any position
i am looking for a key switch that is momentary from any position.
and neutral in center position.
i have looked in many other places, and cannot seem to find what i need.
anyone have an idea ? i'd like it to fit in a 20MM hole if possible,
.
.
searching a key switch...
Key Switch
This part number may work for you from Happ Controls : 30-1086-00
http://www.happcontrols.com/security/301086xxx.htm
Paul
http://www.happcontrols.com/security/301086xxx.htm
Paul
Omron Part Number: A22K-3AC-11
That will give you a 22mm three position (Momentary-OFF-Momentary) key switch. Each MOMENTARY (spring return to center) offers one NO and one NC set of contacts.
The data PDF may be found here:
http://www.omron247.com/doc/pdfcatal.ns ... 220407.pdf
Scroll down to the A22K series. The cost is about $30 from Allied Electronics:
www.alliedelec.com
I am sure Newark and a host of others carry it.
Ron
That will give you a 22mm three position (Momentary-OFF-Momentary) key switch. Each MOMENTARY (spring return to center) offers one NO and one NC set of contacts.
The data PDF may be found here:
http://www.omron247.com/doc/pdfcatal.ns ... 220407.pdf
Scroll down to the A22K series. The cost is about $30 from Allied Electronics:
www.alliedelec.com
I am sure Newark and a host of others carry it.
Ron
- dacflyer
- Posts: 4749
- Joined: Fri Feb 08, 2002 1:01 am
- Location: USA / North Carolina / Fayetteville
- Contact:
well i just got in touch with allied, they said the switchs i want but they need 8 weeks to deliver, how ever thay had one with 1NC and 1NO switch on it, so i asked if they sold spare switches, they did, so i asked if i could also buy a spare NO switch and use it in place of the NC switch... easy fix and now my switchs is on its way.. thanks again
Good deal. Switches like that have the operator and the blocks so just a matter of the block. Hope it does what you want to do.dacflyer wrote:well i just got in touch with allied, they said the switchs i want but they need 8 weeks to deliver, how ever thay had one with 1NC and 1NO switch on it, so i asked if they sold spare switches, they did, so i asked if i could also buy a spare NO switch and use it in place of the NC switch... easy fix and now my switchs is on its way.. thanks again
Ron
Who is online
Users browsing this forum: Google [Bot] and 55 guests