This is the place for any magazine-related discussions that don't fit in any of the column discussion boards below.
copperclad
Posts: 24 Joined: Tue May 30, 2006 11:43 am
Location: rochester ny
Contact:
Post
by copperclad » Sat Dec 09, 2006 5:07 pm
hi
i am building a SBC and want to use an 8K x 8 flash ram , does anyone know where i can find a source for these chips thanks , dana
Chris Smith
Posts: 4325 Joined: Tue Dec 04, 2001 1:01 am
Location: Bieber Ca.
Post
by Chris Smith » Sat Dec 09, 2006 5:14 pm
If your memory chips are not too important for this project, I have TONS of old computer chip / cards?
4 k and up to the meg range.
If your design is specific, sorry.
bodgy
Posts: 1044 Joined: Tue Dec 04, 2001 1:01 am
Location: Australia
Contact:
Post
by bodgy » Sat Dec 09, 2006 7:07 pm
Have a look at Ramtron
www.ramtron.com
Colin
On a clear disk you can seek forever.
copperclad
Posts: 24 Joined: Tue May 30, 2006 11:43 am
Location: rochester ny
Contact:
Post
by copperclad » Sun Dec 10, 2006 4:01 pm
hi
thanks guys , i found a place that carries 28c64's and they will be fine for my project , i was hoping some parts place still carried the 28f64's , thanks again , dana
Users browsing this forum: Ahrefs [Bot] and 26 guests