Fanuc Robot

Interested in Robotics? Here's the place to be.
Post Reply
whiterivermfg
Posts: 2
Joined: Thu Feb 10, 2005 1:01 am
Location: North West
Contact:
Contact whiterivermfg

Fanuc Robot

Post by whiterivermfg »

I have a GMF L-100 with RH Control that i would like to program with g-code from my CAM software. Is there a convertor or post processor that will alow me to get my g-code into the RH contol's Karel language?
Also need a exploded view of the mechanical side of it. The arm and wrists mainly. If someone has a manual laying around could you scan a page or two and send it to me. Or if you have a old manual you don't need let me know what i can do to talk you out of it.<p>Donny <p>www.whiterivermfg.com
Top
bwts
Posts: 229
Joined: Tue Jun 11, 2002 1:01 am
Location: britain
Contact:
Contact bwts

Re: Fanuc Robot

Post by bwts »

I would also be intersted in this :)
"Nothing is true, all is permitted" - Hassan i Sabbah
Top
Post Reply

Return to “Robotics”

Who is online

Users browsing this forum: No registered users and 33 guests