Timer off

This is the place for any magazine-related discussions that don't fit in any of the column discussion boards below.
Post Reply
ctreys
Posts: 1
Joined: Tue Mar 25, 2003 1:01 am
Location: Texas
Contact:

Timer off

Post by ctreys »

Does anyone know of a circut that will set its output high for xx time and then output goes low even if trigger stays high?
pagliacci
Posts: 5
Joined: Thu Mar 20, 2003 1:01 am
Location: st louis
Contact:

Re: Timer off

Post by pagliacci »

HEY TREY:type in 4538 on your browser
gadgeteer
Posts: 102
Joined: Fri Mar 07, 2003 1:01 am
Location: Ok!
Contact:

Re: Timer off

Post by gadgeteer »

4038/4538 is a dual timer; it is edge triggered, so it should work for you (make certain the other trigger is tied toits idle rail...). HOWEVER---you can tie pin 2 of 555 high with a 100k, and trigger through a .01µF cap--should work fine...<p>(a 555 of course triggers on LOW...)
Post Reply

Who is online

Users browsing this forum: Ahrefs [Bot] and 32 guests