Variable 10GHz attenuator needed.

This is the place for any magazine-related discussions that don't fit in any of the column discussion boards below.
Post Reply
rosborne
Posts: 73
Joined: Mon Jun 23, 2003 1:01 am
Contact:

Variable 10GHz attenuator needed.

Post by rosborne » Mon Jul 21, 2003 12:42 pm

Differential signal. Maybe 1 dB resolution. Idea's, anyone? Sidenote: How are optical attenuators made?
-Rick

User avatar
Chris Smith
Posts: 4325
Joined: Tue Dec 04, 2001 1:01 am
Location: Bieber Ca.

Re: Variable 10GHz attenuator needed.

Post by Chris Smith » Mon Jul 21, 2003 2:07 pm

Both of those are a very broad subjects. <p>Optical attenuaters come in many forms, from fiber optics to optical grading, filters, chokes, interferometry and the list is long. <p>MW can be a cavity, choke, filter, electro magnetic, active, passive,... etc. <p>A big book, lots of reading, and still it will be a mystery, for sure?

russlk
Posts: 563
Joined: Thu Dec 06, 2001 1:01 am
Location: New Hampshire
Contact:

Re: Variable 10GHz attenuator needed.

Post by russlk » Tue Jul 22, 2003 6:00 am

What do you mean by "differential signal"? 10GHZ must be in waveguide, coax, or stripline where differential signal doesn't mean anything to me. Hewlett Packard used to make (don't know if it is still available) an IC HMMC-1001 which is rated 2 to 30 db attenuation, DC to 50GHZ.

rosborne
Posts: 73
Joined: Mon Jun 23, 2003 1:01 am
Contact:

Re: Variable 10GHz attenuator needed.

Post by rosborne » Tue Jul 22, 2003 7:55 pm

Russ,
The 10GHz signals comes off of a PCB through 2 SMA connectors to length matched coax cables. The signals are LVDS and are differentially coupled. 100 Ohms between the pair and 50 Ohms to ground. I'm currently wondering if the signal is properly coupled in the coax cables, I think not which may actually be contributing to my current issue. <p>So if I can find/afford the attenuator you recomend I'll need two to do what I want to do. I actually wonder if I might need to have a differential attenuator or if one even exists. I must learn more. I know that when I've tried to find delay lines (yes they had to be differential delay lines) that work at these frequencies (actually only 2.5GHz) I was flumoxed. We ended up tossing the idea around that x*meters of differentially coupled cable was the answer. <p>Well, thanks for asking the questions. I think I might have some ammo for the next step in the lab.
-Rick

Post Reply

Who is online

Users browsing this forum: Google [Bot] and 10 guests