I have a 5.7" LCD Display made by AND and I need the Pin out Assignment. The part number is CS057Q-010. It has a 15 pin male connector on one side of the display board and two wires , pink & white, wired to a 3 pin female connector on the other side of the display board. The 3 pin female connector connects to a 3 pin male connector on a much smaller second board which also has a 4 pin connector. I have contacted the manufacurer, Purdy Electronics via E-mail at Purdyelectronics.com. They have advised that module is no longer produced and that they connot help. I would appreciate anyone that might have the pin out information or data sheets.<p> Thanks,<p> Dave
Oxford, Michigan
Fax: 248 628-6231
E-Mail: [email protected]
I need Pin out assignment for LCD Display
-
- Posts: 2
- Joined: Fri Feb 01, 2002 1:01 am
- Location: Oxford, Mi
- Contact:
Who is online
Users browsing this forum: No registered users and 35 guests