BIOMATION (Gould) K105-D Analyzer Pods

This is the place for any magazine-related discussions that don't fit in any of the column discussion boards below.
Post Reply
natcsparky
Posts: 26
Joined: Fri Jun 21, 2002 1:01 am
Location: Nevada
Contact:

BIOMATION (Gould) K105-D Analyzer Pods

Post by natcsparky »

I'm looking for any information (schematics , parts etc.) for the pods for the BIOMATION K105-D analyzer. Any help would be appreciated. :confused:
Rick Capps
Special Projects
Nevada Automotive Test Center
wd5gnr
Posts: 104
Joined: Wed Dec 19, 2001 1:01 am
Contact:

Re: BIOMATION (Gould) K105-D Analyzer Pods

Post by wd5gnr »

Hi Rick. Is this the one with the centronics plugs in the front or the D connectors? I have one of these (the one with the centronics plugs) and I have the pods (although I would not part with them). I do have the manuals and there is a schematic of the pod (basically a TTL to ECL converter). I can't remember if what I have is the 101 or the 105. However, in either case what I have might help.
natcsparky
Posts: 26
Joined: Fri Jun 21, 2002 1:01 am
Location: Nevada
Contact:

Re: BIOMATION (Gould) K105-D Analyzer Pods

Post by natcsparky »

Al,<p>The one I have (and need) is the DSUB connector version. Your're right the schematic may be helpful. You can contact me (or I can call you off line) . <p>[email protected]<p>Thanks again!
Rick Capps
Special Projects
Nevada Automotive Test Center
Post Reply

Who is online

Users browsing this forum: Ahrefs [Bot] and 12 guests