Requesting deletion of eccentric flywheel garbage

This is the place for any magazine-related discussions that don't fit in any of the column discussion boards below.
User avatar
Externet
Posts: 1888
Joined: Fri Feb 01, 2002 1:01 am
Location: Mideast USA
Contact:

Requesting deletion of eccentric flywheel garbage

Post by Externet »

Enough of it.
I did not want to get close to the issue, but it's time now.
And if you want an eccentic flywheel, a kid can tell you that sawing off a portion of a pulley will do it. And if you cannot saw, drill a hole away from the center.
And end your crap subject.
Miguel :mad:
- Abolish the deciBel ! -
User avatar
Chris Smith
Posts: 4325
Joined: Tue Dec 04, 2001 1:01 am
Location: Bieber Ca.

Re: Requesting deletion of eccentric flywheel garbage

Post by Chris Smith »

Eh! You Talkin to da hustler, Do you think he is listening? <p>Chit has momentum, and keeps rolling down hill!
JdOwNj
Posts: 95
Joined: Thu Dec 06, 2001 1:01 am
Location: Garland, Maine
Contact:

Re: Requesting deletion of eccentric flywheel garbage

Post by JdOwNj »

AMEN... get that smut outa here!
keymaker
Posts: 214
Joined: Mon Jan 14, 2002 1:01 am
Contact:

Re: Requesting deletion of eccentric flywheel garbage

Post by keymaker »

Now you listen here friend ok here's the deal, It is NOT smut, I asked some legitimate questions, which I wanted answered. If your that afraid of your masculinity that you can't stand to read a sortly risque question, You should reside at a gay bar instead of amongst men. I've would have defended my position on this issue sooner, But I've been on a drinking spree as of late. When I am done, I am going to build one of these.. WHY? Because my mother needs money, my father needs money, my woman needs money, my sister needs money, and most of all *I* need money. I'm not here to piss anyone off! If I don't find the knowledge here, where shall I find it? If you're such the expert, Instead of telling me I cannot post here, You tell me WHERE else I can find the information. Don't create problems when you can offer solutions.<p> Thank you for understanding my position, Again, I am not out to offend anyone.
JdOwNj
Posts: 95
Joined: Thu Dec 06, 2001 1:01 am
Location: Garland, Maine
Contact:

Re: Requesting deletion of eccentric flywheel garbage

Post by JdOwNj »

try rec.pornography.devices and get it outa here..
keymaker
Posts: 214
Joined: Mon Jan 14, 2002 1:01 am
Contact:

Re: Requesting deletion of eccentric flywheel garbage

Post by keymaker »

Don't you think those fools will steal my idea???
JdOwNj
Posts: 95
Joined: Thu Dec 06, 2001 1:01 am
Location: Garland, Maine
Contact:

Re: Requesting deletion of eccentric flywheel garbage

Post by JdOwNj »

I dunno... I have to say, I dont frequent the place, but to get back to the basics, you have a MECHANICAL question and this board id dedicated to Electronics!
User avatar
Externet
Posts: 1888
Joined: Fri Feb 01, 2002 1:01 am
Location: Mideast USA
Contact:

Re: Requesting deletion of eccentric flywheel garbage

Post by Externet »

And aren't YOU stealing the idea from somebody else ?<p>And do not come up with any other 'brilliant' reply about NUTS&Volts being also a mechanical stuff because of the NUTS and the GEAR in the logo at top of this forum.<p>And we do not need to know about your drinking problems and needs to feed your family. Alcohol prices can feed people instead.<p>Miguel :mad:
- Abolish the deciBel ! -
josmith
Posts: 340
Joined: Tue Dec 04, 2001 1:01 am
Contact:

Re: Requesting deletion of eccentric flywheel garbage

Post by josmith »

Electronics is not an "adult" subject. I started when I was around 10. I would like to be able to direct any young person here without exposing him or her to anything inappropriate.
User avatar
MicroRem
Posts: 208
Joined: Tue Dec 04, 2001 1:01 am
Location: Vancouver, WA USA
Contact:

Re: Requesting deletion of eccentric flywheel garbage

Post by MicroRem »

Roger that!
bodgy
Posts: 1044
Joined: Tue Dec 04, 2001 1:01 am
Location: Australia
Contact:

Re: Requesting deletion of eccentric flywheel garbage

Post by bodgy »

On that last comment I'll keep silent!
On a clear disk you can seek forever.
JdOwNj
Posts: 95
Joined: Thu Dec 06, 2001 1:01 am
Location: Garland, Maine
Contact:

Re: Requesting deletion of eccentric flywheel garbage

Post by JdOwNj »

Very true about the booze prices... <p>All this talk about vibrators, I start to wonder where he has one stuck...<p>There are other ways to feed a family, get a job for instance...
keymaker
Posts: 214
Joined: Mon Jan 14, 2002 1:01 am
Contact:

Re: Requesting deletion of eccentric flywheel garbage

Post by keymaker »

Miguel stop with your red face
:D
JdOwNj
Posts: 95
Joined: Thu Dec 06, 2001 1:01 am
Location: Garland, Maine
Contact:

Re: Requesting deletion of eccentric flywheel garbage

Post by JdOwNj »

if ur makin the equal of 20 an hour, then what are you trying to build a vibrator for?
JdOwNj
Posts: 95
Joined: Thu Dec 06, 2001 1:01 am
Location: Garland, Maine
Contact:

Re: Requesting deletion of eccentric flywheel garbage

Post by JdOwNj »

A few bottles? I dont buy the stuph (too young), but whats that, 20, 30 bux? thatl buy a few pretty decent meals...
Post Reply

Who is online

Users browsing this forum: No registered users and 92 guests