433mhz data reciever

This is the place for any magazine-related discussions that don't fit in any of the column discussion boards below.
Post Reply
Posts: 85
Joined: Fri Jul 12, 2002 1:01 am
Location: calif.

433mhz data reciever

Post by mikeb » Tue Mar 30, 2004 9:34 am

i recently purchased a 433 mhz data reciever and transmitter modules seperate units. the receiever seems to only work intermittently or when my hand is in close contact with the antenna. the manual for the reciever says that the simplest antenna is a length of wire 7 inchs long an for better reception an distance a ground plane antenna can be used. a ground plane antenna would appear to be to much since i want to use the system indoorsinterfaced with a microcontroller that would recieve data from some external sensors connected to different transmitters. with this being the case i need the reciever to be accurate as far as when the dat is transmitted its recieved by the recieving device. the reciever has a data valid led which can be monitored. so im pretty sure the reception is pretty much intermittent or very sensitive at best, a slight shift of the reciever seems to also stop it from receieving until my hand is brought in close contact with the unit. im using 28 guage stranded wire 7" on the reciever and 20 guage solid hookup wire on the transmitter. any suggestion will be appreciated.

Posts: 563
Joined: Thu Dec 06, 2001 1:01 am
Location: New Hampshire

Re: 433mhz data reciever

Post by russlk » Tue Mar 30, 2004 8:32 pm

The receiver is probably not tuned to the transmitter frequency. Try tuning the receiver for max signal.

Posts: 1761
Joined: Fri Aug 22, 2003 1:01 am
Location: Izmir, Turkiye; from Rochester, NY

Re: 433mhz data reciever

Post by dyarker » Wed Mar 31, 2004 2:03 am

The unit working when your hand is near/on it is the clue. It wants a grounded common. And if TX antennas are vertical, keep RX antenna vertical.<p>Cheers,
Dale Y

Posts: 310
Joined: Tue Feb 11, 2003 1:01 am
Location: Katy Texas

Re: 433mhz data reciever

Post by Will » Thu Apr 01, 2004 8:11 am

Where did you get the Tx/Rx - and how much was it ? I've been looking for one and couldn't find it among Rat Shacks offerings

Post Reply

Who is online

Users browsing this forum: No registered users and 44 guests