2+ lbs of TTL chips.

List your items for sale, trade, or give away here.
Private party only - NO commercial ads allowed
Post Reply
User avatar
philba
Posts: 2050
Joined: Tue Nov 30, 2004 1:01 am
Location: Seattle
Contact:

2+ lbs of TTL chips.

Post by philba »

I've got bags of 74xx chips. more than 2 lbs. Yours for the shipping+. Yes, the original TTL parts. Maybe a few 74Sxx. As an added bonus, there are quite a few ECL chips - MC10xxx.

terms: you pay for shipping plus $1 for packaging+gas (to drive to the ups store).

PM me.

Phil
User avatar
philba
Posts: 2050
Joined: Tue Nov 30, 2004 1:01 am
Location: Seattle
Contact:

Post by philba »

hmmm, no takers? Monday is trash pickup day - they're going then.
JPKNHTP
Posts: 488
Joined: Wed Jun 29, 2005 1:01 am
Location: Missouri
Contact:

Post by JPKNHTP »

-JPKNHTP
-God Bless
L. Daniel Rosa
Posts: 400
Joined: Tue Dec 25, 2001 1:01 am
Location: Bellingham, WA
Contact:

Post by L. Daniel Rosa »

Well, I don't have any need for TTL but the ECL could prove handy. They're the insanely fast ones, right? I might need a counter or two for a front end on a freq. counter.

Actually, now that I think of it there are a few chips I could use. 74_240s would definitely be useful for quite a few things, particularly the hc or hct family. A few 74f04s could be used to make some one-off oscillator modules.

But the real question is whether or not you have the time and inclination todivvy up the parts or even have folks drop by to poke through them. Even if so, I'm not likely to be going that way for at least a month.

Have you contacted the local robotics club? Does a school have an electronics class?
User avatar
Clyde Crashkop
Posts: 99
Joined: Fri Feb 06, 2004 1:01 am
Location: Florida
Contact:

Post by Clyde Crashkop »

I have been getting creative again lately but I come to a screeching halt when I don’t have the chip I want in my minimal collection. I would be grateful to get any that you have left.
mzrn1x
Posts: 5
Joined: Wed Mar 07, 2007 5:56 pm
Contact:

Post by mzrn1x »

Do you still have any left?
User avatar
Clyde Crashkop
Posts: 99
Joined: Fri Feb 06, 2004 1:01 am
Location: Florida
Contact:

Post by Clyde Crashkop »

Philba was nice enough to send those chips to me. I have quite a few of the ones listed below. A lot of others, I have not very many but more than I need. Some are LS but most are not. They were swept up from the floor where he worked so some have bent pins. You are welcome to some at the same deal Philba gave me. Just postage.
I wanted a variety on hand to play with as ideas popped into my mind. I got what I wanted and then some. What do you need / want?

74LS00 Quad 2-Input Positive NAND Gate
74LS04 Hex Inverter
74LS08 Quad 2-Input AND Gate
74LS157 Quad 2-1 Data Selector/Mux
74LS163 Sync 4-Bit Binary Counter
74LS266 Quad 2-Input Exclusive NOR Gate with OC Output
MC10124 QUAD TTL TO MECL TRANSLATOR
MC10125 QUAD MECL TO TTL TRANSISTOR
MC10130 DUAL LATCH
MC10132 2-Line Digital Multiplexer - Latched Output
MC10133 Quad Latch
MC10136 UNIVERSAL HEXADECIMAL COUNTER
mzrn1x
Posts: 5
Joined: Wed Mar 07, 2007 5:56 pm
Contact:

I want them

Post by mzrn1x »

Clyde Crashkop wrote:Philba was nice enough to send those chips to me. I have quite a few of the ones listed below. A lot of others, I have not very many but more than I need. Some are LS but most are not. They were swept up from the floor where he worked so some have bent pins. You are welcome to some at the same deal Philba gave me. Just postage.
I wanted a variety on hand to play with as ideas popped into my mind. I got what I wanted and then some. What do you need / want?

74LS00 Quad 2-Input Positive NAND Gate
74LS04 Hex Inverter
74LS08 Quad 2-Input AND Gate
74LS157 Quad 2-1 Data Selector/Mux
74LS163 Sync 4-Bit Binary Counter
74LS266 Quad 2-Input Exclusive NOR Gate with OC Output
MC10124 QUAD TTL TO MECL TRANSLATOR
MC10125 QUAD MECL TO TTL TRANSISTOR
MC10130 DUAL LATCH
MC10132 2-Line Digital Multiplexer - Latched Output
MC10133 Quad Latch
MC10136 UNIVERSAL HEXADECIMAL COUNTER

Code: Select all

So how do I pay for them?  I have never worked with this site before.  Do you want to give me your address and have me mail a check or is there some PalPay thing I can use?  I have an email account we can use.  [email protected].  Let me know the shipping cost and of course I will send you the "traveling money".
MZRN1X
User avatar
Clyde Crashkop
Posts: 99
Joined: Fri Feb 06, 2004 1:01 am
Location: Florida
Contact:

Post by Clyde Crashkop »

Whoever sent me an E-mail, please send it again. It got away.
I do still have ICs left.
The price is just postage.
User avatar
jaem
Posts: 148
Joined: Thu Feb 15, 2007 3:36 pm
Location: BC, Canada
Contact:

Post by jaem »

E-mail resent.

Thanks
User avatar
jaem
Posts: 148
Joined: Thu Feb 15, 2007 3:36 pm
Location: BC, Canada
Contact:

Post by jaem »

Taken...
Thanks Clyde
Post Reply

Who is online

Users browsing this forum: No registered users and 11 guests