T&L Publications

Hi all..

I've been looking for a good source of toroidal transformers in Canada that match my requirements of a 25-0-25 VAC at 150VA (3A) minimum.

So far the only place I've found is Plitron, but they are rather expensive. I'm sure their product is worth it, however I'd rather go for something a little cheaper.

Does anyone know of a good toroidal transformer supplier in Canada?

Thanks!

You may have to mail order from the US?

In California try "halted specialties". [in N&V Im sure]

Try these guys......
Brownsburg Electronik Inc.
"Transformer and inductor manufacturer"
741 Lowe St.
Lachute
Qc, Canada
www.bei.net

Tell Michael Schwartzman Ian sent you!

1-888-2-Toroid

Not in canada but good prices. The only one in Canada that I could find was Piltron and you are right , they are expensive.

I have another I will look up and post here for you also, as soon as I find it.

I found the other one, I like there prices and shipping is fast.

http://www.apexjr.com/miscellaneous.html#transformers

Let me know what you think.

I like (THEIR )prices sorry lol early now, need a coffee.

This is what cracks me up. this guy states EXACTLY what he's looking for
and gets 4 replies (and counting) for something else.
If you're going to reply to a post why don't you answer the question?
Do you not think this guy is capable of finding U.S. distributers without your help?
I don't get it.

I prefer your Ouija board....Still waiting....still waiting....didn’t think so?

Talk like your answer is cheap, useless and cheap.

Hope your community likes you, we dont.

What I don't get is your negative and sour attitude, which is not welcome anywhere. This person is new to this forum and this is the kind of attitude they get to see with their first post.

The whole idea of this forum is to be able to have a place to share advice , insite, information etc...

I myself had some problem finding toroids reasonably priced and available. Through this forum I saved well over $150.00 for a toroid I was having a hard time finding. This information was very helpful and so I share with others .

This kind of information is useful not only to the person posting but to anyone, anytime in this forum. Many times I search through these posts and have found a lot of new contacts, suppliers and a varity of price comparison.

For people like you who have all of the answers, well I guess you can afford to have that kind of attitude and thats fine , but keep it to yourself, like I said it's not welcome anywhere.

By the way I don't see a whole lot of supplier information in Canada for toroids showing up here, so any information just might be useful.

Exactly, ....If you want to get your “Nickers in a Knotâ€

amelecsol2000,

Let it be. The Moon is still nearly full. He'll be rational and helpful again by Wednesday or Thursday.

Hmmmmm. You guys speak of what's "wanted" and "unwanted" as if you
speak for the entire forum. Well you don't. You only speak for yourself.
As for what is KNOWN about what's wanted or unwanted, in this thread, it
was a toroidal manufacturer in Canada.
So maybe it's YOUR responses that are unwanted. or maybe not actually
unwanted, just irrelevant.
I'm sure you're just wanting to be helpful, desperately so, but insulting the
posters' intelligence with info he could easily look up himself, while not
answering the question he asked, is questionable.
And look at how simple this question is, what happens when something complicated is up? All kinds of irrelevant answers.

dyarker

I will let it ride.
I have read and paid attention to ian's post and replies before as I have yours, Chris Smith's and many many others here.
I will just be sure to clear it with < GOD ian > before I post or reply again.


mmmmm, mabey not.

Trepan

Sorry about all of this, lol , you are probably gone now and won't be back.

This is not typical of this forum, at least that I have known

amelecsol2000

Ian was just rude and with out any help.

Its perfectly fine to bitch,... but just dont leave a blank space where you stole it from.

Add in your two cents worth to the subject at the very least.