help finding eagle parts for db9

This is the place for any magazine-related discussions that don't fit in any of the column discussion boards below.
Post Reply
Posts: 507
Joined: Wed May 18, 2005 1:01 am
Location: Des Moines, Iowa, USA

help finding eagle parts for db9

Post by Newz2000 » Tue Oct 17, 2006 12:08 pm

I'm still trying to find my way around Eagle. I really hate that they make it so hard to find stuff.

I've got this: ... cts_id=429

I want to put it on a circuit board. I can recreate the part, but my goal is to learn where stuff is, so wondered if anyone knows if this is included in eagle and if so how I'd find it.

Also, in the rcl section many caps are listed. I honestly can't figure out which one is right. Is it safe to just find one that roughly matches the dimensions?

Posts: 245
Joined: Sat Aug 09, 2003 1:01 am
Location: Friendswood, TX

Post by hp » Tue Oct 17, 2006 12:17 pm

Look in the library 'con-subd'. I use the F09HP part for those kinds of mounted subd connectors. I am not absolutely sure if it will work for you or not.

To get to it quickly, type "add F09*" in the command bar. It will give you all the matching subd connectors of that type.


User avatar
Posts: 2050
Joined: Tue Nov 30, 2004 1:01 am
Location: Seattle

Post by philba » Tue Oct 17, 2006 1:01 pm

I've used that part and it works ok but be aware that the standard db9 pins are off grid. at least any grid that any other part uses. you will get ultra ugly auto routing and drc will give you angle errors (which i turn off anyway).

Post Reply

Who is online

Users browsing this forum: Majestic-12 [Bot] and 20 guests