serial ir

This is the place for any magazine-related discussions that don't fit in any of the column discussion boards below.
Post Reply
morpheus358
Posts: 2
Joined: Thu Aug 21, 2003 1:01 am
Contact:

serial ir

Post by morpheus358 » Thu Aug 21, 2003 8:54 pm

I'm a BS2 programer and sometimes it's a pain to plug a serial cord to my project. So I was wondering if a program can be downloaded to the BS2 via infra red communication. If so, what do i need to get.<p> Thanks,
Eric

hp
Posts: 245
Joined: Sat Aug 09, 2003 1:01 am
Location: Friendswood, TX
Contact:

Re: serial ir

Post by hp » Thu Aug 21, 2003 9:10 pm

Take a look at this website: http://www.rentron.com/Products/SI-Pro.htm it has a ir interface for basic stamp programming. It looks like it would work for what you want to do.<p>Harrison

morpheus358
Posts: 2
Joined: Thu Aug 21, 2003 1:01 am
Contact:

Re: serial ir

Post by morpheus358 » Thu Aug 21, 2003 9:48 pm

i've been to that web site earlyer and i found this: http://www.rentron.com/Infrared_Communication.htm. do u think this will work. if so how do i create the 38KHz Carrier signal on the computer side and stamp side?<p> Eric

Post Reply

Who is online

Users browsing this forum: No registered users and 13 guests