This is the place for any magazine-related discussions that don't fit in any of the column discussion boards below.
3 posts • Page 1 of 1
I had some spare room on a PCB panel and did a few boards for this simple programmer: http://www.zws.com/products/epromr2/<p>I also wrote a very simple console Windows program to drive it. Unfortunately, it doesn't reliably do 256K parts although for the others it works like a champ. I think there is too much load on some signal on the 256K part as the address shifts over by 1.<p>Still pretty simple to build.
Users browsing this forum: No registered users and 24 guests