Is there a simple way to use a 9V battery, push button, and some simple circuitry to generate a signal that will go at least 50ft and trigger a sound effect chip? I just need to know how to make the transmitter and a reciever that simply sends a trigger signal.<p>Also, what is a good sound chip (5-10 sec) that is cheap (samples are always nice)?<p>Also a chip that could have like 5 sounds it rotates through (5-10 sec each) would be nice, and one that doesn't lose power when the battery does.<p>Thanks!
-Mike
Wireless trigger
Re: Wireless trigger
Anybody? A simple wireless transmitter and a reciever that triggers a digital chip?
Re: Wireless trigger
Try Radio Shack, Mike.
For $25, you get a TX and RX that would power up your voice chip (also available from RS)($5?).
John
For $25, you get a TX and RX that would power up your voice chip (also available from RS)($5?).
John
WA2RBA
Re: Wireless trigger
Whats the fun in buying something from a store when you can build it? <p>If radioshack sells it for $25 its probably worth less than $10, so i'm sure it would be easy to build something like that, right????<p>
Thanks!
Thanks!
Re: Wireless trigger
I see your point Mike!
Try a look in the American Radio Relay League (ARRL) Handbook for loads of info on transmitters and receivers.
Try a look in the American Radio Relay League (ARRL) Handbook for loads of info on transmitters and receivers.
WA2RBA
-
- Posts: 400
- Joined: Tue Dec 25, 2001 1:01 am
- Location: Bellingham, WA
- Contact:
Re: Wireless trigger
Mike, on http://www.tinaja.com/ I saw some reference to the e-series remotes. Don claimed that the RF side was pretty simple and what was transmitted was a 24 bit password with a PIC uC on both ends. A uC could also generate sound effects.
-
- Posts: 458
- Joined: Thu Feb 05, 2004 1:01 am
- Location: Minneapolis, MN
- Contact:
Re: Wireless trigger
The simplest way is probably to buy a cheap radio controlled car and use its receiver to control the sound chip. I've seen toys like this for less than $15 and you'd have the result quickly. Radio Shack used to sell sound chips; if they don't still carry them, DigiKey (www.digikey.com) will.
Re: Wireless trigger
any non-pic ways.<p>Can't I just use something like an antenna, transistor and some kind of crystal to send a signal that a reciever with the same type crystal can pick up and pull down a relay or something for just a split second?<p>Thanks!
-Mike
-Mike
Re: Wireless trigger
"If radioshack sells it for $25 its probably worth less than $10, so i'm sure it would be easy to build something like that, right?"<p>Not even close.
It always costs more to build your own.
It always costs more to build your own.
Re: Wireless trigger
Well, everything else there is way overpriced. a $.10 cent part turns into a $2 item.
Re: Wireless trigger
I'm sure this will not work otherwhise someone would have already posted it but there it goes.<p>Try this from shack and you can build the transmitter and add on to the reciever like a relay or what ever you need to add on to make it work<p>http://www.radioshack.com/product.asp?c ... id=276-640<p>
Hope this helps
Hope this helps
Re: Wireless trigger
Mike,
I have also been experimenting with a 1 bit tx/rx and although I got it to work, it's alot harder than I thought to get any dependable range.
Try these sites for ideas:
http://www.commlinx.com.au/models.htm
http://www.ajpotts.fsnet.co.uk/Circuits.html
http://www.geocities.com/tomzi.geo/1-tr ... sistor.htm
http://www.meridianelectronics.ca/circ/rft1.htm
http://members.shaw.ca/novotill/RcCarsSimple/index.htm
This site has a fm transmitter tutorial that could be modified: http://www.boondog.com/
The basic idea is an L\C tank driving a transistor or two for power output.
For the receiver its about the same, an L\C tank tuned to the transmitter, driving an amp.
I have resorted to an ultra cheap R\C car setup hack. Trust me the $8.50 was way worth it.
Paul
I have also been experimenting with a 1 bit tx/rx and although I got it to work, it's alot harder than I thought to get any dependable range.
Try these sites for ideas:
http://www.commlinx.com.au/models.htm
http://www.ajpotts.fsnet.co.uk/Circuits.html
http://www.geocities.com/tomzi.geo/1-tr ... sistor.htm
http://www.meridianelectronics.ca/circ/rft1.htm
http://members.shaw.ca/novotill/RcCarsSimple/index.htm
This site has a fm transmitter tutorial that could be modified: http://www.boondog.com/
The basic idea is an L\C tank driving a transistor or two for power output.
For the receiver its about the same, an L\C tank tuned to the transmitter, driving an amp.
I have resorted to an ultra cheap R\C car setup hack. Trust me the $8.50 was way worth it.
Paul
Re: Wireless trigger
If battery life is important, and if you must build your own, an RF detector, turning on a LM556 timer to chirp every 5-10 sec's., with power turned on by the detector ckt. I've seen common-base BJT ( in @ emitter ), and JFET circuits which are OFF until they receive input. This will bring your quescient current to near zero. The JFET is better, because it needs less current to turn on. So, when a signal is received at the tuned freq., the 556 receives power, and starts chirping. A large cap, or using a 558 will set duration of 'ON' time.
Can't we end all posts with a comical quip?
Re: Wireless trigger
First, my p71, I have the older version of that that they discontinued. But, I would like to make true wireless not infrared where the remote has to be aiming at it. But I guess that would be much easier to use. does anybody know the range of this? I guess I could use an infrared emitter from an old 1-4-all remote that broke, and I have either an infrared reciever unit or an infrated phototransistor.<p>Second, Paul, thanks for the links and no_vice, thanks for the info about battery life. When I am not using it it will be turned off.<p>
Thanks!
-Mike
Thanks!
-Mike
Re: Wireless trigger
I just found a great deal on a wireless doorbell with a 200 foot range at menards for 8.00.
It comes with a transmitter battery and the lit says it should last for up to 2 years. Pin 12 of the 4069 puts out a pulse to trigger a flip flop or whatever. Excellent all around hackable cheapie.
It comes with a transmitter battery and the lit says it should last for up to 2 years. Pin 12 of the 4069 puts out a pulse to trigger a flip flop or whatever. Excellent all around hackable cheapie.
Who is online
Users browsing this forum: Bing [Bot], Google [Bot], Majestic-12 [Bot] and 63 guests