25kHz

This is the place for any magazine-related discussions that don't fit in any of the column discussion boards below.
Post Reply
QUADRAN
Posts: 1
Joined: Sun Dec 04, 2005 1:01 am
Location: BELGIUM
Contact:

25kHz

Post by QUADRAN »

I am developing a 25kHz synchronous io interface.

It works with a external clock signal.

Does anyone know how the data is handled, I mean if the data is read on the positive edge or negative edge of the clock?

Please any advice is welcome!
User avatar
Chris Smith
Posts: 4325
Joined: Tue Dec 04, 2001 1:01 am
Location: Bieber Ca.

Re: 25kHz

Post by Chris Smith »

Only the data sheet from your chip [s] will tell?
Both can be used to count and time.
User avatar
HighFrequency
Posts: 122
Joined: Sun Apr 17, 2005 1:01 am
Location: Victoria BC
Contact:

Re: 25kHz

Post by HighFrequency »

I suppose it depends on how you design the thing, or what parts you use. Are you using microcontrollers, or CPLD/FPGA?
There is only one correct answer, mine.
Post Reply

Who is online

Users browsing this forum: Ahrefs [Bot] and 29 guests