5 sided semi enclosures

This is the place for any magazine-related discussions that don't fit in any of the column discussion boards below.
Post Reply
Posts: 73
Joined: Mon Jun 23, 2003 1:01 am

5 sided semi enclosures

Post by rosborne » Mon Aug 04, 2003 12:00 pm

Looking for some almost boxes to mount to lab benches. I want to mount BNC barrels to one side for easy access to reference signals. The open side is where the cables would come in to connect to the barrels. They need to look kind of nice or I'd just get a 90 degree bracket and put the barrels in that. Any leads? I looked at Hoffman, which are too specialized and expensive. I just need names . . . and I'll do the rest. Thanks.

Chris Foley
Posts: 146
Joined: Mon Jan 13, 2003 1:01 am
Location: Chicago IL

Re: 5 sided semi enclosures

Post by Chris Foley » Mon Aug 04, 2003 12:43 pm

An inexpensive source for electronics enclosures is LMB:<p>http://www.lmbheeger.com/<p>Happy hunting.

User avatar
Posts: 3046
Joined: Thu Aug 01, 2002 1:01 am
Location: San Jose CA

Re: 5 sided semi enclosures

Post by haklesup » Wed Aug 06, 2003 2:38 pm

A slope front enclosure would probably look good as a control panel. You can have the back opened up and some come with removable panels. In addition to LMB (aka LMB Heeger)also look at Bud Boxes, Serpac and Hammond enclosures. These are often stocked at many electronics retailors. I also think http://www.8020.net/ has some cool stuff if you want something a little bigger.<p>Chris

Post Reply

Who is online

Users browsing this forum: CeaSaR and 33 guests