zilog z8 encore! xp

[philba]

<blockquote><font size="1" face="Verdana, Helvetica, sans-serif">quote:</font><hr>Originally posted by bodgy:
<p>Also, the jumpers were almost certainly in the correct position out of the box.
...
<hr></blockquote><p>Mine were correct OOTB for running the demo but not for the debugging. From what I've seen, others had the same issue.

[rstofer]

Do they provide a schematic that can assist in determining the proper settings?

[philba]

yes, there is a schematic. the correct jumpers are documented in the manual, its just the quick start that has the problem.

[wharding]

Well I finally was able to connect to the target. It turns out that the jumpers were not set correct (debug j4 was off).<p>Thanks for all the help.