Need some basic stamp II help

This is the place for any magazine-related discussions that don't fit in any of the column discussion boards below.
Post Reply
cheesegrass
Posts: 3
Joined: Sat Aug 10, 2002 1:01 am
Location: Dallas TX
Contact:

Need some basic stamp II help

Post by cheesegrass »

Anyone have a link that explains how to construct a carrier board for a basic stamp II? I know I can buy one for $20.00....I just wanted to do it myself.<p>
Thanks
Isenbergdoug
Posts: 31
Joined: Sat Dec 15, 2001 1:01 am
Location: N.C.
Contact:

Re: Need some basic stamp II help

Post by Isenbergdoug »

All you really need is the BSII pinout. I have THE BSII carrier board, and it really isn't anything more than a protoboard with the programming port on it. So to build a carrier board, connect;<p>pin 1 of BSII to pin 2 of serial port (TX)
pin 2 of BSII to pin 3 of serial port (RX)
pin 3 of BSII to pin 4 of serial port (ATN)
pin 4 of BSII to pin 5 of serial port (GND)
connect pin 6 of serial port to pin 7 of serial port if you would like the BSII software to automatically find the serial port address. <p>All this can be found on the Parallax website, here is a link to the technical documents
http://www.parallaxinc.com/html_files/d ... tation.htm<p>Douglas
cheesegrass
Posts: 3
Joined: Sat Aug 10, 2002 1:01 am
Location: Dallas TX
Contact:

Re: Need some basic stamp II help

Post by cheesegrass »

Thanks for the reply. I'll see if I can muddle though it :)
Post Reply

Who is online

Users browsing this forum: Ahrefs [Bot] and 25 guests