voltage regulator

This is the place for any magazine-related discussions that don't fit in any of the column discussion boards below.
Post Reply
Larry Woods
Posts: 14
Joined: Sun Jun 22, 2003 1:01 am
Location: Bellingham
Contact:

voltage regulator

Post by Larry Woods » Sun Jun 22, 2003 3:00 pm

I want to have a 6 volt( sometimes a 1.5 or 3.0 volt) supply off a 12 volt battery.The 12 volt supply is required for a 12 automotive sensor while the lower voltages are for an electronics package. What should I use as I understand a resistor only isn't acceptable.<p>Help is appreciated.<p>Thanks, Larry

greg123
Posts: 361
Joined: Sat Sep 07, 2002 1:01 am
Location: St. John's NFLD Canada
Contact:

Re: voltage regulator

Post by greg123 » Sun Jun 22, 2003 4:02 pm

You can connect a 6 Volt regulator accross the battery. Try a 7506.

User avatar
Chris Smith
Posts: 4325
Joined: Tue Dec 04, 2001 1:01 am
Location: Bieber Ca.

Re: voltage regulator

Post by Chris Smith » Sun Jun 22, 2003 5:58 pm

For lower voltages, use a resistor divider net work tapping off the regulator.

russlk
Posts: 563
Joined: Thu Dec 06, 2001 1:01 am
Location: New Hampshire
Contact:

Re: voltage regulator

Post by russlk » Sun Jun 22, 2003 8:00 pm

an LM317T is an adjustable regulator. Look up the data sheet, it will show how to hook it up.

Post Reply

Who is online

Users browsing this forum: No registered users and 55 guests