How should I operate a Bussmann fuse tester?
How should I operate a Bussmann fuse tester?
2508 - 210527 1. Watch one of the many videos available on YouTube. 2. Follow the instructions included with the tester. Remember that there are many various types of fuses, such as milliampere fuses, slow blow fuses, fast blow fuses, electronic fuses, and so on. Low-cost testers are simply continuity checkers with no quantitative evaluations. You MUST be aware of the test circumstances, such as voltage and current, or you will damage sensitive fuses.
Re: How should I operate a Bussmann fuse tester?
The information about fuse tester can refer to the blog
- dacflyer
- Posts: 4751
- Joined: Fri Feb 08, 2002 1:01 am
- Location: USA / North Carolina / Fayetteville
- Contact:
Re: How should I operate a Bussmann fuse tester?
Hmmmm, looks suspicious.... promotion links
.
.
Re: How should I operate a Bussmann fuse tester?
Inspect that link closely...
Bumped up the game. Only 1 day between article and post here. Used to be about a week.
Bumped up the game. Only 1 day between article and post here. Used to be about a week.
Hey, what do I know?
Re: How should I operate a Bussmann fuse tester?
Fuse analyzer instructions.
1. Install fuse
2. Increase load
3. If fuse 'FAILS' bxxxx, it WAS good.
4, Fuse did not 'FAIL' bxxx
5. Goto step 2
Note: This works the same as the Sylvania flash bulb tester!
Edited based on commentary that sensitive people may possibly be offended, or feel that some obscure inalienable rights have been breached.
1. Install fuse
2. Increase load
3. If fuse 'FAILS' bxxxx, it WAS good.
4, Fuse did not 'FAIL' bxxx
5. Goto step 2
Note: This works the same as the Sylvania flash bulb tester!
Edited based on commentary that sensitive people may possibly be offended, or feel that some obscure inalienable rights have been breached.
Len
“To invent, you need a good imagination and a big pile of junk.” (T. Edison)
"I must be on the way to success since I already have the junk". (Me)
“To invent, you need a good imagination and a big pile of junk.” (T. Edison)
"I must be on the way to success since I already have the junk". (Me)
-
- Posts: 1920
- Joined: Fri Aug 22, 2003 1:01 am
- Location: Izmir, Turkiye; from Rochester, NY
- Contact:
Re: How should I operate a Bussmann fuse tester?
non-politically correct - those who are "thin-skinned" look away now
what kind of electron blows fuses?
what kind of electron blows fuses?
Dale Y
- dacflyer
- Posts: 4751
- Joined: Fri Feb 08, 2002 1:01 am
- Location: USA / North Carolina / Fayetteville
- Contact:
Re: How should I operate a Bussmann fuse tester?
Lol.. I know that one and others...I thought i made them up in the 70's
- dacflyer
- Posts: 4751
- Joined: Fri Feb 08, 2002 1:01 am
- Location: USA / North Carolina / Fayetteville
- Contact:
Re: How should I operate a Bussmann fuse tester?
Lenp >>> I have a box full of those in my desk at home..you can only test them once...lol
Re: How should I operate a Bussmann fuse tester?
true enough, I looked at many of his past posts and all have a link going through this suspicious looking website but at least the topics seems to be relevant and the posts are not incoherent.
www (dot) voidapovoidgevoidewevoidb (dot) net which is not searchable by search engines implying it is a dark web site or at least one that blocks turned off search engines bots. I didn't follow the links or look at source code to see if the page looked malicious, clicker beware. It might just be his private web URL too
www (dot) voidapovoidgevoidewevoidb (dot) net which is not searchable by search engines implying it is a dark web site or at least one that blocks turned off search engines bots. I didn't follow the links or look at source code to see if the page looked malicious, clicker beware. It might just be his private web URL too
Re: How should I operate a Bussmann fuse tester?
Did you see the end of the link? Should be a clue, especially since there's been no other contact from the OP.
Hey, what do I know?
Who is online
Users browsing this forum: No registered users and 167 guests