Probes?

This is the place for any magazine-related discussions that don't fit in any of the column discussion boards below.
Post Reply
User avatar
Lenp
Posts: 1529
Joined: Thu Oct 26, 2006 8:11 pm
Location: Maryland
Contact:

Probes?

Post by Lenp »

Years ago, when electronics was a big hobby/career, many companies sold 'probe kits' These were enclosures, of all types, that you could use to build a custom test probe, signal tracer, injector...whatever. Now it looks like they are in the unobtanium category. Looking in many places nothing was found.
I guess they went the way of Heathkit, Eico sand Knight Kit... :sad:
Any ideas out there for suppliers, or solutions?
Len

“To invent, you need a good imagination and a big pile of junk.” (T. Edison)
"I must be on the way to success since I already have the junk". (Me)
User avatar
Janitor Tzap
Posts: 1707
Joined: Sat Aug 12, 2006 5:17 pm
Contact:

Re: Probes?

Post by Janitor Tzap »

Hmmmm................

There are a few that are still around.

But electronic's have changed.
I've found that DIY Kits for building your own test equipment, costs more than purchasing the test equipment outright now.
So, unless your wanting too understand how the circuit works in the test equipment.
It's just cheaper to just buy the piece of test equipment.

Though,
I'm continuing to see circuits that are made so cheaply, that it isn't worth the trouble to repair.
Or are made too not be easily worked on. :sad:

I just had to throw out a Microwave Oven, that the Magnetron had failed on it.
A replacement Magnetron for it was $123.00 plus shipping.
Which is more than what a new Microwave Oven costs.
{Shake's head}
:sad:
Edit:
I was at Menards getting the dog her Dentix's.
Across the aisle in the small appliances they had brand new 1200Watt Microwave ovens for $50!
:cry:


SIgned: Janitor Tzap
User avatar
Lenp
Posts: 1529
Joined: Thu Oct 26, 2006 8:11 pm
Location: Maryland
Contact:

Re: Probes?

Post by Lenp »

My policy is.. I don't buy anything I'm not comfortable throwing away after the warranty!

'Many years ago there were only a few magnetron designs and, if they fit, they worked. Maybe still so today?
Since the 'electronics' is the usual failure item, there are probably tons of serviceable magnetrons sitting in scrap yards!
Maybe you can get friendly with a junk yard operator (tell him you want the magnets!) ....but watch out for his dog :shock:
Len

“To invent, you need a good imagination and a big pile of junk.” (T. Edison)
"I must be on the way to success since I already have the junk". (Me)
User avatar
Janitor Tzap
Posts: 1707
Joined: Sat Aug 12, 2006 5:17 pm
Contact:

Re: Probes?

Post by Janitor Tzap »

Lenp wrote: Thu Sep 23, 2021 12:13 pmMany years ago there were only a few magnetron designs and, if they fit, they worked. Maybe still so today?
Since the 'electronics' is the usual failure item, there are probably tons of serviceable magnetrons sitting in scrap yards!
Maybe you can get friendly with a junk yard operator (tell him you want the magnets!) ....but watch out for his dog :shock:
Well,
The basic design has stayed pretty much the same.
The ionizing tube has changed very little.
But I am seeing much stronger magnets being used.
Thus, the physical size has shrunk, while the power of the magnetrons has increased greatly.
Most magnetron failures are due too the insulation failing, causing shorts to the chassis ground.
That, or the filament on the ionizing tube opens up.
Nah, too much work to fix a magnetron.

As for the local "Junk Yard Dog".....
She's a big softy.
I have to play with her a bit, before I can go out to "Pull A Part" from the bone yard. :lol:


Signed: Janitor Tzap
User avatar
haklesup
Posts: 3136
Joined: Thu Aug 01, 2002 1:01 am
Location: San Jose CA
Contact:

Re: Probes?

Post by haklesup »

Do you mean like the pencil style enclosure, The exact enclosure style you are picturing in your head may indeed be unobtainable but if you broaden your search to the larger offshore enclosure manufacturers, you might find something useful.

The "Style-case" line from OKW seems like it could be used to hold a logic probe style instrument though a little fatter than the Pen style enclosure. Check out the home page for a muih wider selection
https://www.okwenclosures.com/en/Plasti ... e-Case.htm

haven't found a US link yet but is this what you are looking for? (found with image search on "logic probe enclosure")
http://www.ronex.ee/index.php?group_id= ... ct_details
https://www.rapidonline.com/teko-lp1-pr ... mm-31-0335

I haven't looked at alibaba yet but that's a good place to look too
User avatar
Lenp
Posts: 1529
Joined: Thu Oct 26, 2006 8:11 pm
Location: Maryland
Contact:

Re: Probes?

Post by Lenp »

Yes, The Teko probe would probably work out but not at $40++ for a few pennies worth of plastic!
Mabe I'll just DIY it from scratch with some tubing and a pile of lathe curls. :grin:
Len

“To invent, you need a good imagination and a big pile of junk.” (T. Edison)
"I must be on the way to success since I already have the junk". (Me)
User avatar
Janitor Tzap
Posts: 1707
Joined: Sat Aug 12, 2006 5:17 pm
Contact:

Re: Probes?

Post by Janitor Tzap »

Okay.......
I just remembered this place.
American Science & Surplus https://www.sciplus.com/
They have all sorts of stuff that some may find useful, or just useless!
But, check it out.
They have all kinds of electronic kits and parts.
Lot's of science learning stuff.

EDIT:
How about using one of those Giant Pen's that show up at the Dollar Stores, or Thrift stores?
Image
You could remove the innards of the pen, and put the electronics in it.
Example:
I took a AAA Pen Light, and made it into a IR Detector.
Attachments
IRPC Board.bmp
IRPC Board.bmp (1.69 MiB) Viewed 5616 times
User avatar
haklesup
Posts: 3136
Joined: Thu Aug 01, 2002 1:01 am
Location: San Jose CA
Contact:

Re: Probes?

Post by haklesup »

Great opportunity for 3D printed case. Bigger learning curve and probably still more than $40 though
Post Reply

Who is online

Users browsing this forum: No registered users and 14 guests