I got hold of a lot of Li-po batteries, but I'm having a hard time to find any JST Male pigtails
Kind of like this..
https://alexnld.com/product/10-pcs-jst- ... pv-racing/
I'm not having much luck.. there's plenty of female connectors tho..
I need about 60 of these..
searchine for 2mm JST 5P male connectors
- dacflyer
- Posts: 4748
- Joined: Fri Feb 08, 2002 1:01 am
- Location: USA / North Carolina / Fayetteville
- Contact:
Re: searchine for 2mm JST 5P male connectors
JWAX >> the ebay ones are female connectors, and i don't shop Amazon.. they are on my shit list..lol
But i what to search for now..Thanks
But i what to search for now..Thanks
- Janitor Tzap
- Posts: 1707
- Joined: Sat Aug 12, 2006 5:17 pm
- Contact:
Re: searchine for 2mm JST 5P male connectors
I came a cross these on Digikey.
https://www.digikey.com/product-detail/ ... ND/1530483
Hope this will work for you , though It would be great if I had an actual picture of the female plug to match it by.
Signed: Janitor Tzap
https://www.digikey.com/product-detail/ ... ND/1530483
Hope this will work for you , though It would be great if I had an actual picture of the female plug to match it by.
Signed: Janitor Tzap
Re: searchine for 2mm JST 5P male connectors
Those Digikey are 2.5mm, but if anybody would have what dacflyer is after, it would be Digikey.
WA2RBA
- dacflyer
- Posts: 4748
- Joined: Fri Feb 08, 2002 1:01 am
- Location: USA / North Carolina / Fayetteville
- Contact:
Re: searchine for 2mm JST 5P male connectors
Janitor Tzap >> those are PC mount,, i need pigtails... I'm not having much luck yet.
- Janitor Tzap
- Posts: 1707
- Joined: Sat Aug 12, 2006 5:17 pm
- Contact:
Re: searchine for 2mm JST 5P male connectors
So????
If it is the right connector.
Solder on the wires to the connector.
Then cover the soldered end to the connector with either hot glue, or RTV Silicon Sealant.
Let dry, and your good to go.
But as I said before......
It would be great if I had an actual picture of the female plug to match it by.
EDIT:
Here is the Digikey page with the 2mm jst Male & Female connectors.
https://www.digikey.com/catalog/en/part ... eries/2825
Signed: Janitor Tzap
- dacflyer
- Posts: 4748
- Joined: Fri Feb 08, 2002 1:01 am
- Location: USA / North Carolina / Fayetteville
- Contact:
Re: searchine for 2mm JST 5P male connectors
it's not feasible for me to do this...i have over 60 i'd have to make.
that's why i am looking for something ready made..
that's why i am looking for something ready made..
- Janitor Tzap
- Posts: 1707
- Joined: Sat Aug 12, 2006 5:17 pm
- Contact:
Re: searchine for 2mm JST 5P male connectors
Hmmmm......................
Well,
They do sell the connector, plus pre-crimped wire ends that fit the connector.
https://www.digikey.com/products/en/con ... ageSize=25
Your still going too need to do some assembly and possible soldering.
Signed: Janitor Tzap
Well,
They do sell the connector, plus pre-crimped wire ends that fit the connector.
https://www.digikey.com/products/en/con ... ageSize=25
Your still going too need to do some assembly and possible soldering.
Signed: Janitor Tzap
- dacflyer
- Posts: 4748
- Joined: Fri Feb 08, 2002 1:01 am
- Location: USA / North Carolina / Fayetteville
- Contact:
Re: searchine for 2mm JST 5P male connectors
I'll see if they might send me a sample.
I see online they sell the already female pigtails, but not male ones..Guess they are not popular.
I see online they sell the already female pigtails, but not male ones..Guess they are not popular.
Re: searchine for 2mm JST 5P male connectors
Female connectors are normally used for source connections while male pins are for the load, this helps prevent accidental short circuit if the source by enclosing the pin in the connector body. If pigtails are mainly used on the battery, it makes sense most would be F, while M connectors are more typically board mount. if you want a thru connector with pigtails on both sides, maybe you need to swap for another style.
- dacflyer
- Posts: 4748
- Joined: Fri Feb 08, 2002 1:01 am
- Location: USA / North Carolina / Fayetteville
- Contact:
Re: searchine for 2mm JST 5P male connectors
These are the packs I am using..
https://batteryhookup.com/products/lith ... wh-w-bms-1
I bought 60 of them..
https://batteryhookup.com/products/lith ... wh-w-bms-1
I bought 60 of them..
Re: searchine for 2mm JST 5P male connectors
I think you're going to have to attach your own wires to the header component, then you can insulate with heat shrink or hot glue
- Janitor Tzap
- Posts: 1707
- Joined: Sat Aug 12, 2006 5:17 pm
- Contact:
Re: searchine for 2mm JST 5P male connectors
I agree with haklesup,
The connector is designed to plug in to this type of header.
https://www.digikey.com/catalog/en/part ... eries/2825
So, any way you look at it.
Your going to be doing a lot of soldering.
Signed: Janitor Tzap
The connector is designed to plug in to this type of header.
https://www.digikey.com/catalog/en/part ... eries/2825
So, any way you look at it.
Your going to be doing a lot of soldering.
Signed: Janitor Tzap
Who is online
Users browsing this forum: Ahrefs [Bot] and 33 guests