This is the place for any magazine-related discussions that don't fit in any of the column discussion boards below.
My 'small' $3.00, 150W ATX PS from Good Will is rated for 17Amps at 12v.haklesup wrote:AT power supplies are even easier to use but for the most part, most of the power is in the 5V supplies, the 12V supplies were not much more than an amp or two.
If P=IE, I suppose you could get some what higher current from a 300W ATX. (30 Amps ?)
The 5v STBY output is only good for a few amps, but is always on as long as the ATX is powered, nice feature if you want to provide for ON/OFF control with a electronic switch. (Transistor, onto isolator, etc.)
Users browsing this forum: No registered users and 11 guests