Page 1 of 1
RS-232 led tester
Posted: Fri Nov 30, 2012 5:34 am
by dacflyer
does anyone have info or a schematic on how to build a led tester for RS-232 or RS-485
Re: RS-232 led tester
Posted: Fri Nov 30, 2012 7:23 am
by gerty
IIRC, and we're thinking about the same thing, the one I have has leds connected in series with whatever device is connected to the cable.
Transmit led woulld light up when data sent to device, recieve would light up when device talked back to computer. It had db 25 connectors on each end, and with adaptors it would work on 9 pin. Mine came from RS, I looked and couldn't find one on the web. I'll look at the house and see if I can find mine.
Re: RS-232 led tester
Posted: Sat Dec 01, 2012 11:42 am
by Lenp
Just Google RS232 tester! There are tons, some as low as $4. It's not worth the effort to build it!
Len
Re: RS-232 led tester
Posted: Mon Dec 03, 2012 12:44 pm
by dacflyer
i seen testers online,
i was hoping to make something just to quickly see if i had data talking. we got a new tester for PTZ cameras, a handheld unit. it works fine for rs232 , but we cannot get it to work with rs485 and it is supposed to auto detect.
but seems to not work, so trying to see if the problem is in the cabinet hardware or the tester..