I have a project to build once my hand approaches the sensor(or metal plate) appro. 10 cm, A LED lights on; at about 8 cm distance,
B LED turns on and at about 5 cm, C LED turns on(Total there is 3 LED).Would somebody give me any circuit diagrams??( As I use a MCU to check any frequency change if there is any movement so that which LED to turn on).
body detector
-
- Posts: 3
- Joined: Thu Apr 01, 2004 1:01 am
- Contact:
- Chris Smith
- Posts: 4325
- Joined: Tue Dec 04, 2001 1:01 am
- Location: Bieber Ca.
Re: body detector
A 555 can be tweaked up to go off at several feet, near pin #3. Email on the way.<p>Correction, pin #2<p>[ April 01, 2004: Message edited by: Chris Smith ]<p>[ April 03, 2004: Message edited by: Chris Smith ]</p>
Who is online
Users browsing this forum: No registered users and 58 guests