Where are areas 1 and 2?

[Bigglez]

Trying to decypher the midi article in Nuts and Volts March 2009.
Page 40 column two, second paragraph. "Areas 1 and 2 implement Switches
1 and 2 in the block diagram, respectively." Anyone?

[afarawayland]

It may refer to the earlier article, and involve subdivisions of the mistralXG.

[Bigglez]

It may refer to the earlier article, and involve subdivisions of the mistralXG.

Good point. I loaned my copy to someone. I'll reread the
part one text on line, time permitting, and take it from
there.

[rolerbe]

Areas 1 and 2 were moved to Area 51

[Bigglez]

Areas 1 and 2 were moved to Area 51

Where is that? I was hoping to learn about MIDI stuff, but that
article was just too hard to follow? Has anyone else here tried
to build the hardware, or understand the MIDI technology?

[CeaSaR]

While I still don't know where areas 1 & 2 are, I do know that
Area 51 is -> here.

(Really big )

CeaSaR

[steverus]

I've only just discovered this thread. I'm the author of the mistralXG project. Areas 1 & 2 (and several others) were indicated on the original schematic I provided to N&V when I submitted the article. Unfortunately, they were removed by the magazine's staff during layout. You can still get the original schematic in the project files from the N&V site.

Steve Russell.

[dobrien]

The author has a more of a detail at
http://www.grapevyne.com/pic.projects/h ... lXG-II.pdf