Where are areas 1 and 2?

This is the place for any magazine-related discussions that don't fit in any of the column discussion boards below.
Post Reply
Bigglez
Posts: 1282
Joined: Mon Oct 15, 2007 7:39 pm
Contact:

Where are areas 1 and 2?

Post by Bigglez » Sun Mar 01, 2009 11:02 am

Trying to decypher the midi article in Nuts and Volts March 2009.
Page 40 column two, second paragraph. "Areas 1 and 2 implement Switches
1 and 2 in the block diagram, respectively." Anyone?

User avatar
afarawayland
Posts: 8
Joined: Wed Nov 26, 2008 10:19 pm
Location: Tennessee Valley, AL
Contact:

Re: Where are areas 1 and 2?

Post by afarawayland » Tue Mar 10, 2009 1:10 pm

It may refer to the earlier article, and involve subdivisions of the mistralXG.

Bigglez
Posts: 1282
Joined: Mon Oct 15, 2007 7:39 pm
Contact:

Re: Where are areas 1 and 2?

Post by Bigglez » Tue Mar 10, 2009 1:49 pm

afarawayland wrote:It may refer to the earlier article, and involve subdivisions of the mistralXG.
Good point. I loaned my copy to someone. I'll reread the
part one text on line, time permitting, and take it from
there.

rolerbe
Posts: 28
Joined: Sat May 17, 2008 11:29 am
Contact:

Re: Where are areas 1 and 2?

Post by rolerbe » Wed Apr 01, 2009 5:31 pm

Areas 1 and 2 were moved to Area 51 :wink:

Bigglez
Posts: 1282
Joined: Mon Oct 15, 2007 7:39 pm
Contact:

Re: Where are areas 1 and 2?

Post by Bigglez » Thu Apr 02, 2009 11:38 am

rolerbe wrote:Areas 1 and 2 were moved to Area 51
Where is that? I was hoping to learn about MIDI stuff, but that
article was just too hard to follow? Has anyone else here tried
to build the hardware, or understand the MIDI technology?

User avatar
CeaSaR
Posts: 1779
Joined: Sat Nov 08, 2003 1:01 am
Location: Phoenixville, PA USA
Contact:

Re: Where are areas 1 and 2?

Post by CeaSaR » Thu Apr 02, 2009 2:31 pm

While I still don't know where areas 1 & 2 are, I do know that
Area 51 is -> here.

(Really big :wink: )

CeaSaR
Hey, what do I know?

steverus
Posts: 4
Joined: Sat Feb 21, 2009 8:21 am
Contact:

Re: Where are areas 1 and 2?

Post by steverus » Wed Feb 10, 2010 2:27 am

I've only just discovered this thread. I'm the author of the mistralXG project. Areas 1 & 2 (and several others) were indicated on the original schematic I provided to N&V when I submitted the article. Unfortunately, they were removed by the magazine's staff during layout. You can still get the original schematic in the project files from the N&V site.

Steve Russell.

dobrien
Posts: 37
Joined: Thu May 15, 2008 6:01 am
Contact:

Re: Where are areas 1 and 2?

Post by dobrien » Wed Feb 10, 2010 6:39 am

The author has a more of a detail at
http://www.grapevyne.com/pic.projects/h ... lXG-II.pdf

Post Reply

Who is online

Users browsing this forum: No registered users and 23 guests