this is a M123L chassis 2005 model
cannot get any video ( tuner or rca input )to work
you can see blue screen and menu etc,
but you cannot tune in any channels or get the set to use any rca inputs.
and i am clueless to find the problem without a schematic.. have looked on a few sites for schematics,,but none are available yet..
i have poked around and i cannot see any loss of power anywhere, all voltages seem to be present.
i need a schematic RCA 14F512T
Re: i need a schematic RCA 14F512T
Failed Science:
Feathers are light.
The sun gives off light
Therefore, the sun gives off feathers.
Feathers are light.
The sun gives off light
Therefore, the sun gives off feathers.
- dacflyer
- Posts: 4751
- Joined: Fri Feb 08, 2002 1:01 am
- Location: USA / North Carolina / Fayetteville
- Contact:
Re: i need a schematic RCA 14F512T
EDD >> the set has a blue screen
BLUE SCREEN OF DEATH , Hmmm i get menu info on the screen just fine. so i assume the video is working fine. the set seems to not get any input signals. tuner or rca inputs.
there is a large combo chip. i belive to be the vert , horz , color , processor etc. and then theres another chip on a sister board, chip is bout the size of a button on a key board.
will corrospond more later on..
BLUE SCREEN OF DEATH , Hmmm i get menu info on the screen just fine. so i assume the video is working fine. the set seems to not get any input signals. tuner or rca inputs.
there is a large combo chip. i belive to be the vert , horz , color , processor etc. and then theres another chip on a sister board, chip is bout the size of a button on a key board.
will corrospond more later on..
- dacflyer
- Posts: 4751
- Joined: Fri Feb 08, 2002 1:01 am
- Location: USA / North Carolina / Fayetteville
- Contact:
Re: i need a schematic RCA 14F512T
hey Edd >> supposed to get a schematic tomorrow on CD , i hope this helps me out..
will share my findings later on..
will share my findings later on..
- dacflyer
- Posts: 4751
- Joined: Fri Feb 08, 2002 1:01 am
- Location: USA / North Carolina / Fayetteville
- Contact:
Re: i need a schematic RCA 14F512T
ok, i got the cd
- dacflyer
- Posts: 4751
- Joined: Fri Feb 08, 2002 1:01 am
- Location: USA / North Carolina / Fayetteville
- Contact:
Re: i need a schematic RCA 14F512T
still no leads on a rca part 266910
anyone out there got any leads,,
anyone out there got any leads,,
That part is no longer supplied by RCA, hence all distributors
list it as No Longer Available ... it is an IC #IC201 and would
sell for around $16 if you can find it
Are you sure that is the problem ? ?
Check all your power supply outputs before condeming the IC
If you Really Need it, best I could suggest is find some Factory
Authorized RCA Warranty repair shops near you ... give them
a visit ... they Might have one still on hand
Just found this link:
http://bestbuycanada.partsearch.com/Par ... ber=266910
[They claim to have it ... don't know if they will ship to US
Hope it helps[/url]
list it as No Longer Available ... it is an IC #IC201 and would
sell for around $16 if you can find it
Are you sure that is the problem ? ?
Check all your power supply outputs before condeming the IC
If you Really Need it, best I could suggest is find some Factory
Authorized RCA Warranty repair shops near you ... give them
a visit ... they Might have one still on hand
Just found this link:
http://bestbuycanada.partsearch.com/Par ... ber=266910
[They claim to have it ... don't know if they will ship to US
Hope it helps[/url]
- dacflyer
- Posts: 4751
- Joined: Fri Feb 08, 2002 1:01 am
- Location: USA / North Carolina / Fayetteville
- Contact:
DAMMIT !
i just got off of the phone and checked with bestbuy canada...they just now tell me after 2 weeks that the part is suddenly no longer available..
i am gonna call RCA and bless them out..
they should GIVE me a replacement TV... especially for all this aggervation..
and to top it off.. i have here another tv, thats a RCA , less then 6 months old,, a 32" and the pix tube is bad...and they will not cover labor on the warranty... WTF !
RCA is defenitly on my S**T list now ! *mad*
i just got off of the phone and checked with bestbuy canada...they just now tell me after 2 weeks that the part is suddenly no longer available..
i am gonna call RCA and bless them out..
they should GIVE me a replacement TV... especially for all this aggervation..
and to top it off.. i have here another tv, thats a RCA , less then 6 months old,, a 32" and the pix tube is bad...and they will not cover labor on the warranty... WTF !
RCA is defenitly on my S**T list now ! *mad*
Who is online
Users browsing this forum: No registered users and 153 guests