Page 1 of 1

Operate a MAX395 cmos switch w\BS2?

Posted: Sun Jan 12, 2003 2:21 pm
by VoX Automation,LLC
How is a Dallas MAX395 SPI chip operated with a BasicStamp2 (BS2) micro? I've tried all the sample code with no luck. Can't get the IC to open/close switches! Help!

Re: Operate a MAX395 cmos switch w\BS2?

Posted: Mon Jan 13, 2003 3:10 pm
by russlk
Conditions for the MAX395 to work are: CS(not, pin24, low; RESET(not), pin23, high; 8 bits of data at DIN, pin3, synchronsly clocked with SCLK, pin1; then bring CS(not), pin24 high.