T&L Publications

Hi,..<p>I've made a Laser alarm that use a protection in shops, apartments and may cars. I want now to make a remote control that has 2 bottons only(ON/OFF) with its receiver as well.<p>So, If you don't mind, please send me a schematics for both the remote and its receiver.<p>Thanks very very much for all your help

Check the April 2002 issue of Nuts and Volts. There is a remote control system that you can build.

There's a website I found that has 2 transmitters(AM&FM), I got those transmitters and made some modifications to the FM transmitter to be used as a simple transmitter, But now I want to modify those trans. to be used as a remote.
The site is : http://www.geocities.com/engmwahid/index.htm<p>Note: HOW CAN I GET THE APRIL 2002 ISSUE.??????
Copy the link and paste it in a new browser
Thanks for help

Use the pull down menu on the home page and find "back issues" you can either buy it or all the articles are available here on-line.

Have a look at http://www.wd5gnr.com/rfrem.htm and see if you can adapt that.

Thanks for your help,.. but the circuit found in N&V April2002, doesn't have any values.....<p>So, please check the website I told you about and tell me what modifications shall I do to those transmitters.???????
http://www.geocities.com/engmwahid/index.htm<p>Thanks again for all your help <p>[ October 16, 2003: Message edited by: Michael Wahid ]</p>

Hi,..<p> Does anyone have any idea about how to make ON/OFF remote control and its receiver.????<p> It's idea is like the remote used in the car doorlock.<p> Thanks very much for all your help <p>[ October 19, 2003: Message edited by: Michael Wahid ]</p>

Go to www.rentron.com They have several different solutions for your problem. I'd guess you'd be interested in the TX-99-K2 two button keyfob remote (about $25) and the Ming RE-99 reciever (about $10). Plus they have schematics to show you how.<p>I've had good experiance with thier tech support too.<p>-Denny