Ungar parts needed

This is the place for any magazine-related discussions that don't fit in any of the column discussion boards below.
Post Reply
bruceb
Posts: 15
Joined: Fri Sep 02, 2005 1:01 am
Location: wayne, nj
Contact:

Ungar parts needed

Post by bruceb » Fri Sep 02, 2005 12:28 pm

I have an old Ungarmatic soldering station that I
would like to find some parts for (obsolete, parts distributors do not carry or can get any more)<p>Ungar #79 .... Tip Retaining Rings
Ungar #77 .... 700 Deg Heater
Ungar #71 .... Handle & Cord Assembly
Ungar #84, #88, #81, #93 Tips<p>Let me know if you have any of these unused <p>Email: [email protected]<p>Thanks

User avatar
dacflyer
Posts: 4538
Joined: Fri Feb 08, 2002 1:01 am
Location: USA / North Carolina / Fayetteville
Contact:

Re: Ungar parts needed

Post by dacflyer » Wed Sep 07, 2005 1:29 pm

have you checked e-bay ?

terri
Posts: 404
Joined: Sun Nov 07, 2004 1:01 am
Location: colorado
Contact:

Re: Ungar parts needed

Post by terri » Wed Sep 07, 2005 2:02 pm

Edd Whatley
Charter Member
Member # 202<p> posted March 07, 2005 11:20 PM<p>The above-cited post contained a lot of information on Ungar stations. I just searched the NUTSVOLTS forum by the search term "Soldering Station," but now you can search it more specifically by the date and the member number, 202
terri wd0edw

bruceb
Posts: 15
Joined: Fri Sep 02, 2005 1:01 am
Location: wayne, nj
Contact:

Re: Ungar parts needed

Post by bruceb » Sat Sep 10, 2005 10:46 am

I will try looking on ebay ... not too much
in the way of Ungar items at present <p>Thanks

bruceb
Posts: 15
Joined: Fri Sep 02, 2005 1:01 am
Location: wayne, nj
Contact:

Re: Ungar parts needed

Post by bruceb » Sat Sep 10, 2005 10:52 am

Terri,<p>Can't find that post by #202
on Mar 7, 2005 <p>Or did I misread it & it is under
your name / # ?

terri
Posts: 404
Joined: Sun Nov 07, 2004 1:01 am
Location: colorado
Contact:

Re: Ungar parts needed

Post by terri » Sat Sep 10, 2005 11:26 am

Here's the link to the first Whatley article:<p>http://206.131.241.58/ubb/ultimatebb.ph ... 1&t=002631<p>Scroll down to the 07 Mar 2005 posting by Edd. Lots of good info, although the topic started with Weller stations.<p>Here's the link to the second Whatley article, which is on the second page of this topic --again, scroll down:<p>http://206.131.241.58/ubb/ultimatebb.ph ... 002631&p=2<p>In the first one, Whatley gives a link to Weller-Ungar parts as follows:<p>http://www.arcade-electronics.com/welle ... rtscat.pdf<p>Apparently entering the forum member number messes up the search....?<p>I didn't pursue all the nitties and gritties in these articles, so I can only hope it helps.<p>[ September 10, 2005: Message edited by: terri ]</p>
terri wd0edw

Post Reply

Who is online

Users browsing this forum: No registered users and 32 guests