new to the ez430, any help available?
Posted: Sat Dec 13, 2008 5:48 am
I recently decided to learn, I bought a TI ez430. Nice, inexpensive, but there is a lack of information for newbies like me.
I'm using this to learn both the hardware and C, with which I'm not familiar.
Needing output, I interfaced a 2X16 LCD to it, and and led on one output pin, and an input pin as a adc.
I have a simple program that displays the adc value on the lcd, now I want the led to turn on if the adc is >1v, off if <1v, but I'm having problems properly configuring the i/o. The LCD display routines always turn on the led and in my ignorance I can't figure out why.
Is there anyone out there who would be willing to help with the ez430?
I'll eventually figure this out, but it's always easier with help.
There seems to be very little available to help beginning hobbyists get started with something like the ez430.
thanks
Rudy
If anyone is interested in CNC g-code, be sure to check out rudy's cnc freeware
I'm using this to learn both the hardware and C, with which I'm not familiar.
Needing output, I interfaced a 2X16 LCD to it, and and led on one output pin, and an input pin as a adc.
I have a simple program that displays the adc value on the lcd, now I want the led to turn on if the adc is >1v, off if <1v, but I'm having problems properly configuring the i/o. The LCD display routines always turn on the led and in my ignorance I can't figure out why.
Is there anyone out there who would be willing to help with the ez430?
I'll eventually figure this out, but it's always easier with help.
There seems to be very little available to help beginning hobbyists get started with something like the ez430.
thanks
Rudy
If anyone is interested in CNC g-code, be sure to check out rudy's cnc freeware