No Flow Chart

Electronics Computer Programming Q&A
Post Reply
frank_fg
Posts: 23
Joined: Tue Apr 29, 2008 9:07 am
Contact:

No Flow Chart

Post by frank_fg » Fri Aug 22, 2008 9:58 am

:smile: Al

Sorry I'v been in an unexpected vacation, but I'm back now and ready to go.


Master PIC talking to Slave PIC to control a motor.

As I said above comunication is good.

I need to capture the three zero characters that are being sent to the Masters LCD display from the slave.

RS-232

Testip: bsf portb,rb0 ; Red LED on.
call rxw ;Test for new data.
btfss status,z ;If z set then new data.
return ;Return If z is clear.
call txw ;Send same data byte back.
movwf reflevel2
bsf portb,rb1 ;Green LED on.
return

========================================

Rxw: bcf status,z ;z flag cleard to show no data.
btfss pir1,rcif ;Test for new data.
return ;No data exit, z flag clear.
btfss rcsta,ferr
goto rw1
*> movf rereg,w ;Move data into W.
bcf status,z
goto rw2

=========================================
*> I would thing that at this point I could copy the new data to
a file name stop,then compare it to a file name STOP that has '000'
in it and if so stop the motor.

--------------------------------------------------------------------------------

What do think?

I need to look the compare cmd for the PIC16F88.

Thanks

Frank G.

Post Reply

Who is online

Users browsing this forum: No registered users and 3 guests