Page 1 of 1
MicroCode Studio question
Posted: Thu May 01, 2008 4:57 pm
by Novorski
Does anyone know how can I change the PIC model which I want to program in MicroCode Studio? I'm talking about that small window where you suppose to be able to change the PICs. There is only one model to select: 16F628 and I need P16F876A. Anyone?
Posted: Thu May 01, 2008 8:08 pm
by Franklin97355
According to their website:
MicroCode Studio
The ICD for MicroCode Studio supports the following PIC microcontroller device.
16F628
Posted: Fri May 02, 2008 6:32 am
by Novorski
OK, but I've seen article in N&V in January'06 where the author could change that. Anyone knows where I can that version of the software(it was
MicroCode Studio)?
Posted: Fri May 02, 2008 7:13 am
by Franklin97355
Posted: Fri May 02, 2008 7:35 am
by Novorski
Spanks, but free version would be much more appreciated.
Posted: Fri May 02, 2008 8:47 am
by Bigglez
*** Redacted by poster ***
Posted: Sat May 03, 2008 9:28 am
by Novorski
Bigglez wrote:Novorski wrote:
Spanks, but free version would be much more appreciated.
Send me $49.95 plus, oh, ten bucks handling, and I'll
get you a 'free' copy...
It said in one of the issues of N&V that it's free, so get the
[Edited objectional expletive] out, you idiot.
Posted: Mon May 05, 2008 6:41 pm
by Franklin97355
It said in one of the issues of N&V that it's free, so <DELETED>
Which issue and what was the site referenced (Insert deleted part here)?
Posted: Tue May 06, 2008 10:07 am
by philba
setting aside the OPs bad behavior - it appears that the free version ONLY supports the 628. I've seen that stated in two different places. Just because a 2 year old article says differently doesn't make it so.
I suggest the OP do 2 things: a) learn to use google and find all the locations for downloading the latest version and b) don't be so thin skinned when asking for help.
Posted: Tue May 06, 2008 12:00 pm
by Novorski
Franklin97355 wrote:It said in one of the issues of N&V that it's free, so <DELETED>
Which issue and what was the site referenced (Insert deleted part here)?
It was January/06 issue and the site was
www.melabs.com
Posted: Tue May 06, 2008 5:26 pm
by Franklin97355
Sorry but the current version costs money unless you program the one chip allowed in the free version.