Vehicle Speed Threshold Trigger
Posted: Thu Nov 12, 2009 9:46 am
To assist with parking, I'm installing front- & side-view cameras on my truck. The vehicle is already equipped with a rear-view camera (with display & associated electronics), and I also have a video switcher to select desired view. As viewing any video while driving may be dangerous though, my goal is to disable camera outputs at, say, 5 mph.
I'd like to use a PIC to monitor vehicle speed and output a signal when speed threshold is met. The truck's PCM currently provides a 5V square-wave pulse signal, which appears to be close to the actual vehicle speed (mph)--eg. 12Hz = 10 mph. Any help utilizing a PIC to achieve the above goal would be greatly appreciated.
Many thanks!
I'd like to use a PIC to monitor vehicle speed and output a signal when speed threshold is met. The truck's PCM currently provides a 5V square-wave pulse signal, which appears to be close to the actual vehicle speed (mph)--eg. 12Hz = 10 mph. Any help utilizing a PIC to achieve the above goal would be greatly appreciated.
Many thanks!