Interested in Robotics? Here's the place to be.
t2436jf
Posts: 1 Joined: Mon May 22, 2006 5:59 pm
Contact:
Post
by t2436jf Mon May 22, 2006 6:58 pm
Hi all,
I'm new here but dropped by for a reason. I'm building an autopilot and I need to find a source of good quality plastic gears to build the control servos. It's nothing more than gear reduction just like a normal servo.
any help is greatly appreciated.
Thanks
-John
dyarker
Posts: 1917 Joined: Fri Aug 22, 2003 1:01 amLocation: Izmir, Turkiye; from Rochester, NY
Contact:
Post
by dyarker Tue May 23, 2006 5:55 am
Dale Y
Shopdawg
Posts: 3 Joined: Mon Jun 05, 2006 6:44 pmLocation: Mustang, OK
Contact:
Post
by Shopdawg Tue Jun 06, 2006 8:52 am
Servo City for anything that you can slap on a servo
http://www.servocity.com
Stock drive products or SPI are both good for gears and power transmission components.
Droidwerkz
Posts: 31 Joined: Fri Jan 11, 2008 5:58 pmLocation: Rockford Illinois
Contact:
Post
by Droidwerkz Sun Jan 13, 2008 11:34 pm
hakbot
Posts: 14 Joined: Mon Jan 02, 2006 1:01 am
Contact:
Post
by hakbot Tue Jan 15, 2008 12:54 pm
Check out R/C car pinion and sprockets. They are much cheaper than many of the previous sources listed.
Users browsing this forum: No registered users and 15 guests
