Stepper Motor Wiring Diagram
Stepper Motor Wiring Diagram
Does anyone know the wiring diagram for the Japan Servo Company model KP39HM2 stepper motor? I went to their site but found nothing. It has 2 red, 1 orange, brown, yellow, and black. Any help would be appreciated.
========
--Matt--
========
--Matt--
========
Re: Stepper Motor Wiring Diagram
Hi matt<p>To find the windings on the motor use a continuity test on the wires the continous ones will all be connected to the same winding. I think these ones are 12v R they out of a disk drive? Think Ive got some but havent played with them yet.<p>B)
"Nothing is true, all is permitted" - Hassan i Sabbah
Re: Stepper Motor Wiring Diagram
It's out of an old 5 1/4 disk drive. I think that it is 12v.
========
--Matt--
========
--Matt--
========
-
- Posts: 31
- Joined: Fri Jan 11, 2008 5:58 pm
- Location: Rockford Illinois
- Contact:
if i remember my terminolgoy, you are using a unipolar stepper (it has 3 field windings, and either 5 or 6 wires) bipolar steppers have 3 or 4 wires (two field windings ) the ones with odd numbers share a common on all coils measure the resistance of the wires , once you have found and sorted it into 3 sets of 2 wires with equal resistance, or into 2 or three sets with a common you have found your two or three field windings , now all you need to figure out is the rotational order and you have it , now it's all about control!
Who is online
Users browsing this forum: No registered users and 57 guests