T&L Publications

+S +V -V -S FG AC(L) AC(N)<p>from my experiece with power supplies out of industrial video games... i have seen the following...maybe this works for you...<p>+V = +5V -V = -5V +S = +12V -S = -12V FG = DC-GROUND<p>AC (L) LINE AC (N) NEUTRAL CASE = AC-GROUND<p>GOOD LUCK ...

the servo i have in mind does have a lot of torque. designed for a sail boat..very strong..
also the return spring on the carb has been removed too..i have no problem to adapt mechanically,,but i need a circuit diagram that will work a r/c servo...

sorry EDD i am totally lost now..haven't a clue what you said (<p>what i mean by servo was one like used on a r/c airplane or as such...<p>russes wasn't really what i wanted either..but if its all i can find then i will have to use it ..

try a bigger cap in paralell with the leds and then they will fade off...experiment with bigger caps till you get the desired fade you want...

hey i think i got what i want... ADVICE>>><p>how bout a 4024 i salvaged from a traffic signal FLASHER...blinks wig wag style,,this flasher controlled 2 120 volt circuits,,triacs fired by opto isolators..,at about a 50-50 duty cycle,,,, this works off 120v directly resistered to logic level...and the...

Phuuuuu ! never thought i'd stir up so much stuff here !
but still WOW !<p>will look into russ's deal...thanx....
thanx to all that gave their comments..

Hmmmm only thing i can think of,,is if the led does not go out,,maybe the cap is too high capacity?...does it fade out after a while...??
i might make one on my bench and test it...
and then work on the plans for the quad 555...
will respond in a few days...

i am not worried about power failures..but if someone can provide me a schematic for the line powered 60Hz timebase that would be great.. like i said i want to keep this simple..<p>and i will be using 2 circles of 60 leds = 120 and 12 segments for the hrs... and when i am done, i will be happy to sh...

you never commented on my idea...i guess your bike has no gearbox ...

told you before,,,in the application i want.. a mechanical one is impossible....<p>i think i am the 1st one to take up 3 pages in my quest..lol..see if i can set a record before i get what i want...<p>
EDD WHERE ARE YOU !

i am looking to build a rather crude strange clock kinda sorta like the the big ben clock but less fancy...i been dreaming this way before the big ben was put into N&V...i like it tho..<p>anyway heres my idea,,,sounds good anyway...feel free to tell me of my flaws<p>i want to use 6 (4017 decade ...

well i would suspect a green light...most bikes i seen have a neutral switch on the transmission this indicates your bike is out of gear and safe to start....i you like use a relay and invert this..so if bike is in gear,the red light comes on indicating bike is in gear...follow me?<p>when bike is in...

FENCE CHARGERS ARE CHEAP..goto local farm supply or pet supply , or lowes or "home cheapo"depot most any hardware has what you need and the insulators...not expencive at all....cheaper than a new roof..lol<p>but note...since your roof is not a earth ground..you will need to have adouble ro...

works good for close stations... not far away ones.. live in the country here..doesn't do good for me...
the big giant delta shaped traditional antenna works best for me...and a rotator for pointing towards stations

ok, wait to see what happens... hoping for something under 75.00 if possible...i keep searching elsewhere too...