T&L Publications

Thanks for your suggestions and help everyone.:smile: I think I'm going to goto one of the local Electronic Surplus Stores and look for a 9Vdc or 12Vdc WallWart that has an output Current of 800ma or higher. Next; I'll install a 6Vdc Regulator, and add extra filtering to it. Hopefully this will end ...

I assume that your current wall wart isn't regulated. did it come with the set? did you ever run the set off of a WW without the interference? maybe a dumb question but does the set have a power input jack or are you hooking up to the battery terminals? I purchased the wall wart separately. I have ...

I see I didn't supply you with enough information. Ok.... 1) The Current Power Supply I'm using is A 120Vac to 6VDC 500ma output Wallwart. {Modified with extra filtering} 2) The hum bars show up when I use its built-in dipole antenna, or when connected to an external antenna. {So, I'm fairly sure it...

Does any one know of a good 6VDC power supply circuit? I have a Casio 2.5" Color LCD Television that I use a 6VDC Power Supply with it. But even after filtering the 6VDC, I still get the 60Hz hum bars. I've been looking for a SMP type, but I'm not seeing anything in the 6VDC range. The current ...

UPDATE: Well, I took a part the charging base for one of the phones and made a horrible discovery. :sad: The contact points of the charger where the phone sits on the charger base has 6 VAC on it! Which means the AC Voltage is rectified in the hand set! And there is no room in the hand set to place...

I see I forgot too mention a few things...... The Battery Packs are in the Phones themselves when they are sitting on the charging base. So a Quote:"Temperature meters you buy at WalMart and tape it to the cells." Is out of the question. I have found that when then packs are fully charged,...

I have two Cordless Phones that use 3.6V 700ma Nicad Battery packs They both work fine. But they burn up battery packs in about a year or less. The problem is mainly charging. You put the phone back into the charging base and it shows that it's charging. But not the condition of the battieries. I ca...

{No Info}